Model 6493
Modular Passive Oscilloscope Probe
Accessories included with Probe:
Model 6493
Modular Passive Oscilloscope Probe
Features
•
•
•
This probe is recommended for general purpose
probing applications and is adjustable for low
frequencies.
The probe's entire core is made of a high quality
ceramic hybrid.
Pure coaxial design and laser trimmed resistors
ensure highest signal fidelity along the signal path
offering high bandwidth and fast risetimes for
accurate impulse measurements.
Our passive probes are spring loaded, with needle
sharp tips to support precise and safe
measurements.
Probe tips are interchangeable and can be replaced
easily.
Accessories (one of each) included with Probe are:
Ground Blade
Ground Lead with Alligator Clip 22 cm (8.66”)
IC Caps: 0.8mm, 1.0mm, and 1.27mm pitch
Insulating Cap (green)
Protection Cap
Solid Tip 0.8mm (0.0315”)
Spring Tip 0.8mm (0.0315”)
Sprung Hook
Adjustment Tool
Copper (Cu) Pads
Specifications
Attenuation Ratio
Maximum Input Voltage CAT II¹
Scope Bandwidth MHz
Probe Bandwidth MHz (-3 dB)
System Risetime (ns)
Probe Input Resistance (MΩ)
Probe Input Capacitance (pF)
Compensation Range (pF)
Cable Length
10:1
300 Vrms
60
150
< 2.4
10
< 12.5
15 - 40
4 ft. (1.2 m)
•
•
•
1
Rating:
Per IEC 61010-031. Maximum voltage allowed on the low or ground
connection including shell and housing must not exceed 30 V.
Ordering Information
Model: 6493
150 MHz X10 Oscilloscope Probe
Sales: 800-490-2361
Technical Support:
technicalsupport@pomonatest.com
Fax: 425-446-5844
Europe:
31-(0) 40 2675 150
International:
425-446-5500
Where to Buy:
www.pomonaelectronics.com
USA:
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm),
.xxx = ± .005” (,127 mm). All specifications are to the latest revisions.
Specifications are subject to change without notice. Registered trademarks are
the property of their respective companies.
Copyright © 2008
D2015564 Rev. 001
Page 1 of 1
POMONA [ POMONA ELECTRONICS ]
