Pomona
®
Model 6703A
HDTV, 75 Ohm BNC
Connector for RG-6/U
Features:
Connectors are precision machined (not die-cast) from brass.
Black nickel plating is applied for easily identification as a high definition connector.
Insulator material is high density PTFE to maintain a perfect dielectric constant.
Connectors utilize gold plated contact pin to maintain low return loss in high definition applications.
Connector is precision matched to Belden ® 1694A cable, a precision low loss serial digital video
RG-6/U coax cable.
video coax for analog and digital SDI/HDTV applications
Connectors use standard commercial die set, size: 0.324"/0.255"/0.068" HEX and 0.052"/0.042" SQ
(e.g. model 2657 or 2699 from Paladin Tools)
Materials:
Connector Body
Crimp Ferrule
Outer Contact
Male Contact Pin
Insulator
Black nickel plated brass
Nickel plated annealed copper
Nickel plated brass
Gold plated brass
Polytetrafluorethylene (PTFE)
75 ohms
0 to 3 GHz.
1.3 max
0.2 db (@ 3GHz.)
-55 db (@ 3GHz.)
3 Milliohms
*500 V
5,000 Megohms
500 min.
60 lbs.
-55 to +199° C
Ratings:
Impedance:
Frequency:
VSWR:
Insertion Loss:
Leakage Loss:
Contact Resistance:
Voltage
Insulation Resistance:
Insertions:
Cable Retention:
Temperature:
*Hands
free testing
in controlled voltage environment;
For CE compliance:
not intended for hand held use at voltages above 33Vms/70
Vdc
All dimensions are in inches. Tolerances (except noted): .xx = ±.02” (,51 mm), .xxx = ± .005” (,127 mm).
All specifications are to the latest revisions. Specifications are subject to change without notice.
Registered trademarks are the property of their respective companies. Made in USA
Sales: 800-490-2361 Fax: 425-446-5844 Technical Assistance:
technicalsupport@pomonatest.com
For “Where to Buy” information, visit the Pomona web site at www.pomonaelectronics.com
Rev: 005
D1099634
Page 1 of
POMONA [ POMONA ELECTRONICS ]
