PO74HSTL85331A
3.3V 1:4 Crystal Oscillator/
Differential Clock or Data Fanout Buffer
08/03/06
700MHz HSTL Potato Chip
Maximum Ratings
Description
Note:
Max
-65 to 150
Unit
stresses greater than listed under
Maximum
Ratings
may
cause
Storage Temperature
Operation Temperature
Operation Voltage
Input Voltage
°C
°C
V
permanent damage to the device. This
is a stress rating only and functional
operation of the device at these or any
other conditions above those indicated
in the operational sections of this
specification is not implied. Exposure
to absolute maximum rating conditions
for extended periods may affect
reliability specification is not implied.
-40 to 85
-0.5 to +4.6
-0.5 to +5.5
-0.5 to Vcc+0.5
V
Output Voltage
V
DC Electrical Characteristics
Symbol
Description
Test Conditions
Min
Typ Max
Unit
Output High voltage
Output Low voltage
Clamp diode voltage
Vcc=3V Vin=VIH or VIL, IOH= -12mA
Vcc=3V Vin=VIH or VIL, IOH=12mA
VOH
VOL
VIK
2.4
3
-
V
V
V
-
-
0.3
0.5
Vcc = Min. And IIN = -18mA
-0.7 -1.2
Multiple Supplies:The Voltage on any input or I/O pin cannot exceed the power pin during power-up. Power supply sequencing is NOT required.
Notes:
1. For conditions shown as Max. or Min., use appropriate value specified under Electrical Characteristics for the applicable device type.
2. Typical values are at Vcc = 3.3V, 25 °C ambient.
3. This parameter is guaranteed but not tested.
4. Not more than one output should be shorted at one time. Duration of the test should not exceed one second.
5. VoH = Vcc – 0.6V at rated current
3
Copyright © 2005, Potato Semiconductor Corporation
POTATO [ POTATO SEMICONDUCTOR CORPORATION ]
