Preliminary Datasheet
LP28011
1A Single-chip Li-ion and Li-POL Charge with OVP
General Description
The LP28011 is a complete constant-current/ constant-
voltage linear charger for single cell lithium-ion batteries.
Its TDFN-10 package and low external component count
make the LP28011 ideally suited for portable applications.
Furthermore, the LP28011 is specifically designed to work
within USB power specifications. Its have a over voltage
protection in input with 6V and support over zero voltages
of battery can charge enable.
No external sense resistor is needed, and no blocking diode
is required due to the internal MOSFET architecture.
Thermal feedback regulates the charge current to limit the
die temperature during high power operation or high
ambient temperature. The charge voltage is fixed at 4.2V,
and the charge current can be ISET rammed externally with
a single resistor. The LP28011 automatically terminates the
charge cycle when the charge current drops to 1/10th the
ISET rammed value after the final float voltage is reached.
When the input supply (wall adapter or USB supply) is
removed, the LP28011 automatically enters a low current
state, dropping the battery drain current to less than 2µA.
The LP28011 can be put into shutdown mode, reducing the
supply current to 25µA.
Other features include charge current monitor, undervoltage
lockout, automatic recharge and a status pin to indicate
charge termination and the presence of an input voltage.
Features
Very Low Power Dissipation
Vin Over Voltage Protection:6V
Short-circuit protection
Programmable Charge Current Up to 1000mA
No MOSFET, Sense Resistor or Blocking Diode
Required
Constant-Current/Constant-Voltage Operation with
Thermal Regulation* to Maximize Charge Rate Without
Risk of Overheating
Charges Single Cell Li-Ion Batteries Directly from USB
Port
25µA Supply Current in Shutdown
Time Pre-charge Conditioning With Safety Timer
Reverse Leakage Protection Prevents Battery
Drainage Charge Current Thermal Regulation Status
Outputs for LED or System Interface
Indicates Charge and Fault Conditions
Optional Battery Temperature Monitoring Before and
During Charge Automatic Sleep Mode for Low-Power
Consumption Available in 3mm × 3mm TDFN-10
Package
RoHS Compliant and 100% Lead (Pb)-Free
Typical Application Circuit
Order Information
LP28011 -
□ □ □
F: Pb-Free
Package Type
QV: TDFN-10
Vin
1
2
3
4
5
VIN
VIN
STAT1
STAT2
VSS
LP28011
BATT
BATT
VSS
VSS
ISET
10
9
8
7
6
Rset
1uF
BT3
BATT
VBAT
BATTERY
Applications
Portable Media Players/MP3 players
Cellular and Smart mobile phone
PDA/DSC
I
STAT
=830/Rset
Marking Information
Please see website.
Bluetooth Applications
LP28011 – 01 Ver. 1.1 Datasheet
Nov.-2007
Page 1 of 10
POWER [ LOWPOWER SEMICONDUCTOR INC ]
