Product Specification
PE43601
Product Description
The PE43601 is a HaRP™-enhanced, high linearity, 6-bit RF
Digital Step Attenuator (DSA). This highly versatile DSA
covers a 15.75 dB attenuation range in 0.25 dB steps. The
Peregrine 50Ω RF DSA provides a serial-addressable CMOS
control interface. It maintains high attenuation accuracy over
frequency and temperature and exhibits very low insertion loss
and low power consumption. Performance does not change
with V
DD
due to on-board regulator. This next generation
Peregrine DSA is available in a 5x5 mm 32-lead QFN footprint.
The PE43601 is manufactured on Peregrine’s UltraCMOS™
process, a patented variation of silicon-on-insulator (SOI)
technology on a sapphire substrate, offering the performance
of GaAs with the economy and integration of conventional
CMOS.
50
Ω
RF Digital Attenuator
6-bit, 15.75 dB, 9 kHz - 6.0 GHz
Features
•
HaRP™-enhanced UltraCMOS™ device
•
Attenuation: 0.25 dB steps to 15.75 dB
•
High Linearity: Typical +58 dBm IIP3
Excellent low-frequency performance
•
3.3 V or 5.0 V Power Supply Voltage
•
Fast switch settling time
•
Programming Modes:
•
•
•
•
•
Direct Parallel
Latched Parallel
Serial-Addressable: Program up to
eight addresses 000 - 111
Figure 1. Package Type
32-lead 5x5x0.85 mm QFN Package
Serial Two-Byte Protocol: Address and
Data Word
•
High-attenuation state @ power-up (PUP)
•
CMOS Compatible
•
No DC blocking capacitors required
•
Packaged in a 32-lead 5x5x0.85 mm QFN
Figure 2. Functional Schematic Diagram
Switched Attenuator Array
RF Input
RF Output
Parallel Control
Serial In
6
Control Logic Interface
CLK
LE
A0
A1
A2
P/S
©2008-2009 Peregrine Semiconductor Corp. All rights reserved.
Page 1 of 13
Document No. 70-0253-05
│
www.psemi.com