September 2006
rev 0.3
Nine Output 3.3V Buffer
Features
Functional Description
One-input to Nine-Output Buffer/Driver
Supports two DIMMs or four SO-DIMMs with one
additional output for feedback to an external or
chipset PLL
Low power consumption for mobile applications
Less than 32mA at 66.6MHz with unloaded
outputs
1nS Input-Output delay
Buffers all frequencies from DC to 133.33MHz
Output-output skew less than 250pS
Multiple V
DD
and V
SS
pins for noise and
electromagnetic interference (EMI) reduction
Space-saving 16 pin 150 mil SOIC Package
3.3V operation
Commercial and Industrial temperature parts are
available
PCS2P2309NZ
The PCS2P2309NZ is a low-cost buffer designed to
distribute high-speed clocks in mobile PC systems and
desktop PC systems with SDRAM support. The part has
nine outputs, eight of which can be used to drive two
DIMMs or four SO-DIMMs, and the remaining can be used
for external feedback to a PLL. The device operates at
3.3V and outputs can run up to 133.33MHz.
The PCS2P2309NZ is designed for low EMI and power
optimization. It has multiple V
SS
and V
DD
pins for noise
optimization and consumes less than 32mA at 66.6MHz,
making it ideal for the low-power requirements of mobile
systems. It is available in an ultra-compact 150 mil 16 pin
SOIC Package.
Block Diagram
BUF_IN
OUTPUT1
OUTPUT2
OUTPUT3
OUTPUT4
OUTPUT5
OUTPUT6
OUTPUT7
OUTPUT8
OUTPUT9
PulseCore Semiconductor
1715,S.Bascom Avenue,Suite200,Campbell,CA 95008• Tel: 408-879-9077
•
Fax: 408-8879-9018
•
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
PULSECORE [ PulseCore Semiconductor ]
