February 2008
rev 0.2
Spread Spectrum EMI reduction IC for HD Display
Features
•
•
•
•
•
•
•
•
•
PCS3P6200A
(EMI) at the clock source, allowing system wide reduction
of EMI of
all clock
dependent signals. PCS3P6200A
allows significant system cost savings by reducing the
number of circuit board layers, ferrite beads, shielding
that are traditionally required to pass EMI regulations.
The Supply Voltage of the Device is 3.3V/2.5V. It has two
Spread Selection Pins, SS1% and SS2% to select among
the four possible deviation options. The Frequency
Deviation across the Frequency range remains within
±10% of the selected deviation.
Refer to the Frequency
Deviation Selection Table for details.
The Device is
available in a 6 Pin TSOT-26 Package, over Commercial
and Industrial temperature range.
Custom Clock Generator for Display Systems
Wide Operating Frequency Range covering
most of the pixel frequencies
Generates a low EMI 1x Output
Frequency range: 25 MHz - 120 MHz
4 Frequency Deviation selection options
± 1.50%, ± 1.25%, ± 0.75%, ± 1.00%
Supply voltage : 3.3V±0.3V
2.5V±0.125V
ModRate 85KHz @ 72MHz
6 Pin TSOT-26 package
Commercial and Industrial Temperature range
Product Description
Application
PCS3P6200A is a versatile spread spectrum modulator
designed
specifically
for
a
wide
range
of
clock
PCS3P6200A is targeted for use in a broad range of
applications including Liquid Crystal and Plasma Displays
frequencies. The device addresses the need of a low
EMI clock generator for use in display systems covering
wide choice of pixel frequencies.
PCS3P6200A
reduces
electromagnetic
interference
Block Diagram
VDD
SS2%
SS1%
CLKIN
PLL
ModOUT
VSS
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008
•
Tel: 408-879-9077
•
Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
PULSECORE [ PulseCore Semiconductor ]
