November 2006
rev 0.3
3.3V 1:8 LVCMOS PLL Clock Generator
Features
•
•
•
•
•
1:8 PLL based low-voltage clock generator
Supports zero-delay operation
3.3V power supply
Generates clock signals up to 125MHz
PLL guaranteed to lock down to 145MHz, output
frequency = 36.25MHz
•
•
•
•
•
•
•
Maximum output skew of 150 pS
Differential LVPECL reference clock input
External PLL feedback
Drives up to 16 clock lines
32 lead LQFP & TQFP Packages
Industrial temperature range
Pin
and
function
compatible
to
the
PCS5I9653A
running at either 4x or 8x of the reference clock frequency.
The PCS5I9653A is guaranteed to lock in a low power PLL
mode in the high frequency range (VCO_SEL = 0) down to
PLL = 145 MHz or Fref = 36.25MHz.
The PCS5I9653A has a differential LVPECL reference
input long with an external feedback input. The device is
ideal for use as a zero delay, low skew fanout buffer. The
device performance has been tuned and optimized for zero
delay performance. The PLL_EN and BYPASS controls
select the PLL bypass configuration for test and diagnosis.
In this configuration, the selected input reference clock is
bypassing the PLL and routed either to the output dividers
or directly to the outputs. The PLL bypass configurations
are
fully
static
and
the
minimum
clock
frequency
specification and all other PLL characteristics do not apply.
The outputs can be disabled (high-impedance) and the
device reset by asserting the MR/OE pin. Asserting MR/OE
also causes the PLL to loose lock due to missing feedback
signal presence at FB_IN. Deasserting MR/OE will enable
the outputs and close the phase locked loop, enabling the
PLL to recover to normal operation. The PCS5I9653A is
fully 3.3V compatible and requires no external loop filter
components. The inputs (except PCLK) accept LVCMOS
except signals while the outputs provide LVCMOS
compatible levels with the capability to drive terminated
50Ω transmission lines. For series terminated transmission
lines, each of the PCS5I9653A outputs can drive one or
two traces giving the devices an effective fanout of 1:16.
The device is packaged in a 7x7 mm2 32-lead LQFP &
TQFP Packages.
MPC953,MPC9653A and MPC9653
Functional Description
The PCS5I9653A utilizes PLL technology to frequency lock
its outputs onto an input reference clock. Normal operation
of the PCS5I9653A requires the connection of the QFB
output to the feedback input to close the PLL feedback path
(external feedback). With the PLL locked, the output
frequency is equal to the reference frequency of the device
and VCO_SEL selects the operating frequency range of 25
to 62.5MHz or 50 to 125MHz. The two available post-PLL
dividers selected by VCO_SEL (divide-by-4 or divide-by-8)
and the reference clock frequency determine the VCO
frequency. Both must be selected to match the VCO
frequency range. The internal VCO of the PCS5I9653A is
PulseCore Semiconductor Corporation
1715 S. Bascom Ave Suite 200, Campbell, CA 95008
•
Tel: 408-879-9077
•
Fax: 408-879-9018
www.pulsecoresemi.com
Notice: The information in this document is subject to change without notice.
PULSECORE [ PulseCore Semiconductor ]
