Module mounting considerations
The modules may be mounted vertically or bent horizontal to the motherboard.
Good RF layout practice should be observed. If the connection between module and antenna is more
than about 20mm long use 50Ω microstrip line or coax or a combination of both. It is desirable (but not
essential) to fill all unused PCB area around the module with ground plane.
Variants and ordering information
The HX1 transmitter is manufactured in the following variants as standard:
HX1-144.390-3
HX1-144.800-3
HX1-168.360-3
HX1-169.4125-3
HX1-169.5625-3
HX1-173.225-3
Other variants can be supplied to individual customer requirements at frequencies from 120MHz to 180MHz
Matching Receivers:
NRX1-xxx.xxx-10 (SIL footprint)
BiM1R-xxx.xxx-10 (DIL footprint)
Radiometrix Ltd.,
HX1 high power transmitter data sheet
Page 8
RADIOMETRIX [ RADIOMETRIX LTD ]
