Hartcran House, 231 Kenton Lane, Harrow, Middlesex, HA3 8RP, England
Tel: +44 (0) 20 8909 9595, Fax: +44 (0) 20 8909 2233, www.radiometrix.com
KTX2
Issue 1, 30 July 2012
UHF FM Code-Hopping Data Transmitter Module
The KTX2 is a miniature PCB mounting
code-hopping UHF radio transmitter
suitable for use in secure remote
keyless
control
applications
at
distances up to 75 metres in-building or
300 metres open ground.
Figure 1: KTX2-433
Features
Designed for compliance with EN 300 220-3 and EN 301 489-3
Each transmitter module is pre-programmed and unique
No additional circuitry required to use the module
32-bit encryption – more than 4 billion combinations
Usable range up to 300m
Available at 433.92MHz
Fully screened module
Suitable for use with a Radiometrix KRX receiver-decoder
The module combines full screening with extensive internal filtering for EMC - minimising spurious radiations
and susceptibilities. The KTX2 module will suit wireless control links in applications including car and building
security and secure unidirectional remote process control. Because of the small size and low power
requirement the module is ideal for use in portable, battery-powered devices such as hand-held remote controls
requiring data integrity and high security.
Technical Summary
Crystal-locked PLL
FM data with Manchester encoding
Operation from 3V to 6V
+3dBm output on 433.92MHz
<1uA standby, 8mA Tx current
Supply status included in transmission
Radiometrix Ltd, KTX2 Data Sheet
page 1
RADIOMETRIX [ RADIOMETRIX LTD ]
