CLOCK
Page 2 of 3
*1 Test Conditions Unless Stated Otherwise: Nominal Vcc, Nominal Load, +25 ±3°C
*2 Frequency Dependent
*3 Not All Stabilities Available With All Temperature Ranges—Please Consult Factory For Availability
*4 Measured with Wavecrest SIA-3000A 1,000,000 Hits no filtering
*5 Calculated from Agilent 5500 phase noise measurements
*6 Measured with Agilent 5500
ꢂ
PART NUMBERING SYSTEM:
FREQUENCY
STABILITY
(Overall)
TEMPERATURE
RANGE (°C)
FREQUENCY
(MHz)
SERIES
SYMMETRY
CS9L: UHF +3.3Vdc Clock with PECL Comp. Output A: 40/60 to 60/40%
CSPL: UHF +2.5Vdc Clock with PECL Comp. Output T: 45/55 to 55/45% S: 0…+70
R: 0…+50
150.000…700.000
K: ±20 ppm**
I: ±25 ppm**
H: ±50 ppm
J: ±100 ppm
U: -20…+70
V: -40…+85**
EXAMPLE: CS9LASH-155.520
Clock Oscillator, 7x5mm Package, +3.3 VDC Supply Voltage, PECL Output, Standard Symmetry, 0…+70°C Operating
Temperature Range, ±50 ppm Total Frequency Stability, 155.520 MHz
**Above 300MHz extended temp range and ±25ppm stability may not be available, jitter may vary upon spec requirements.
Please consult the factory for any custom requirements.
ꢂ
MECHANICAL PARAMETERS:
OUTLINE TOLERANCE:
±0.006” / 0.15mm
INDICATES PIN 1.
(Unless otherwise specified)
PIN FUNCTIONS:
[1] ENABLE/ DISABLE
[2] NO CONNECT
[3] CASE GROUND
[4] OUTPUT
.276 ±.008
7.0 ±0.2
.079 MAX.
2.00 MAX.
[5] COMP. OUTPUT
[6] SUPPLY VOLTAGE
MARKING:
CS9LASH
155.52
.200
5.08
.100
2.54
.079 TYP.
2.00 TYP.
RAL D/C
1
2
3
4
.087
2.20
*0.01µF external by-pass
filter is recommended as seen on solder
pattern.
6
5
.055
1.40
TYP.
.071
1.80
.100
2.54
SOLDER PATTERN
RALTRON ELECTRONICS CORP. ꢀ10651 N.W . 19t h St ꢀMiami, Florida 33172 ꢀU.S.A.
phone: (305) 593-6033 ꢀfax: (305) 594-3973 ꢀe-mail: sales@raltron.com ꢀWEB: http://www.raltron.com
RALTRON [ Raltron Electronics Corporation ]
