RF3319D
•
•
•
•
Ideal Front-End Filter for European Wireless Receivers
Low-Loss, Coupled-Resonator Quartz Design
Simple External Impedance Matching
Complies with Directive 2002/95/EC (RoHS)
Pb
868.95 MHz
SAW Filter
The RF3319D is a low-loss, compact, and economical surface-acoustic-wave (SAW) filter designed to provide
front-end selectivity in 868.95 MHz receivers. Receiver designs using this filter include superhet with
10.7 MHz or 500 kHz IF, direct conversion and superregen. Typical applications of these receivers are
wireless remote-control and security devices operating in Europe under ETSI I-ETS 300 220, in Germany
under FTZ 17 TR 2100, in the United Kingdom under DTI MPT 1340 (for automotive only), in France under
PTT Specifications ST/PAA/TPA/AGH/1542, and in Scandinavia.
This coupled-resonator filter (CRF) uses selective null placement to provide suppression, typically greater
than 40 dB, of the LO and image spurious responses of superhet receivers with 10.7 MHz IF. RFM’s advanced
SAW design and fabrication technology is utilized to achieve high performance and very low loss with simple
external impedance matching (not included).
SM3838-8 Case
3.8 x 3.8
Typical
868.95
2.2
4.0
900
Electrical Characteristics
Characteristic
Center Frequency @ 25°C
Insertion Loss
3 dB Bandwidth
10 - 700 MHz
700 - 830 MHz
830 - 850 MHz
Attenuation:
(relative to ILmin)
850 - 865 MHz
871 - 878 MHz
878 - 883 MHz
883 - 900 MHz
900 - 1000 MHz
Temperature
Frequency Aging
Impedance @ f
C
Freq. Temp. Coefficient
Absolute Value during the First Year
Input Z
IN
= R
IN
/C
IN
Output Z
OUT
= R
OUT
/C
OUT
7 Inch Reel
13 Inch Reel
FTC
|fA|
Z
IN
Z
OUT
3, 4
5
1
1, 3
Absolute Frequency
Sym
f
C
IL
BW
3
Notes
1, 2, 3
1
1, 3
Minimum
Maximum
Units
MHz
dB
kHz
500
50
40
35
20
21
15
28
40
650
55
45
40
24
30
20
35
45
0.032
<±10
28.8
Ω
// 1.93pF
26.9
Ω
// 2.2pF
dB
ppm/
°C
2
ppm/yr
Lid Symbolization (in addition to Lot and/or Date Codes)
Standard Reel Quantity
Standard Reel Quantity
9
668 // YWWS
500 Pieces/Reel
3000 Pieces/Reel
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
Unless noted otherwise, all measurements are made with the filter installed in the specified test fixture which is connected to a 50
Ω
test system with
VSWR
≤
1.2:1. The test fixture L and C are adjusted for minimum insertion loss at the filter center frequency, f
c
. Note that insertion loss and band-
width are dependent on the impedance matching component values and quality.
The frequency f
c
is defined as the midpoint between the 3dB frequencies.
Where noted, specifications apply over the entire specified operating temperature range of -40 to 90°C.
The turnover temperature, T
O
, is the temperature of maximum (or turnover) frequency, f
o
. The nominal frequency at any case temperature, T
c
, may
be calculated from: f = f
o
[1 - FTC (T
o
- T
c
)
2
].
Frequency aging is the change in fc with time and is specified at +65°C or less. Aging may exceed the specification for prolonged temperatures
above +65°C. Typically, aging is greatest the first year after manufacture, decreasing significantly in subsequent years.
The design, manufacturing process, and specifications of this device are subject to change without notice.
One or more of the following U.S. Patents apply: 4,54,488, 4,616,197, and others pending.
All equipment designs utilizing this product must be approved by the appropriate government agency prior to manufacture or sale.
Tape and Reel Standard for ANSI / EIA 481.
2.
3.
4.
5.
6.
7.
8.
9.
www.RFM.com
E-mail: info@rfm.com
©2008 by RF Monolithics, Inc.
Page 1 of 2
RF3319D - 3/21/08
RFM [ RF MONOLITHICS, INC ]
