Preliminary
®
RO2044
318.00 MHz
SAW
Resonator
•
•
•
•
•
Designed for 318 MHz Transmitter Applications
Low Series Resistance
Quartz Stability
Rugged, Hermetic, Low-Profile TO39 Case
Pb
Complies with Directive 2002/95/EC (RoHS)
The RO2044 is a true one-port, surface-acoustic-wave (SAW) resonator in a low-profile TO39 case. It pro-
vides reliable, fundamental-mode quartz frequency stabilization of fixed-frequency transmitters operating at
or near 318 MHz. The RO2044 is designed specifically for remote-control and wireless security AM transmit-
ters operating in the USA under FCC Part 15, in Canada under Doc RSS-210, and in Australia.
Absolute Maximum Ratings
Rating
CW RF Power Dissipation
DC Voltage Between Terminals (Observe ESD Precautions)
Case Temperature
Value
+0
±30
-40 to +85
Units
dBm
VDC
°C
TO39-3 Case
Electrical Characteristics
Characteristic
Frequency (+25 °C)
Insertion Loss
Quality Factor
Temperature Stability
Unloaded Q
50
Ω
Loaded Q
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Frequency Aging
RF Equivalent RLC Model
Absolute Value during the First Year
Sym
f
C
∆f
C
IL
Q
U
Q
L
T
O
f
O
FTC
|fA|
R
M
L
M
C
M
C
O
C
P
L
TEST
Notes
2, 3, 4, 5
2, 5, 6
5, 6, 7
Minimum
317.900
Typical
Maximu
318.100
±100
Units
MHz
kHz
dB
Nominal Frequency
Tolerance from 318.000 MHz
2.4
10400
2400
29
44
f
C
+4.2
0.037
10
1.0
32
5.0
59
°C
kHz
ppm/°C
2
ppm/yr
MΩ
6, 7, 8
1, 6
5
5, 6, 7, 9
5, 6, 9
5, 6, 7, 9
2, 7
2.9
DC Insulation Resistance between Any Two Pins
Motional Resistance
Motional Inductance
Motional Capacitance
Pin 1 to Pin 2 Static Capacitance
Transducer Static Capacitance
Test Fixture Shunt Inductance
Lid Symbolization (in addition to Lot and/or Date Codes)
78
Ω
µH
fF
160.269
1.56292
3.2
3.0
78
RFM // RO2044 // YWWS##
3.6
pF
pF
nH
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
Frequency aging is the change in f
C
with time and is specified at +65°C or less.
Aging may exceed the specification for prolonged temperatures above +65°C.
Typically, aging is greatest the first year after manufacture, decreasing signifi-
cantly in subsequent years.
The center frequency, f
C
, is measured at the minimum insertion loss point, IL
MIN
,
with the resonator in the 50
Ω
test system (VSWR
≤
1.2:1). The shunt induc-
tance, L
TEST
, is tuned for parallel resonance with C
O
at f
C
. Typically, f
OSCILLA-
TOR
or f
TRANSMITTER
is less than the resonator f
C
.
One or more of the following United States patents apply: 4,454,488 and
4,616,197 and others pending.
Typically, equipment designs utilizing this device require emissions testing and
government approval, which is the responsibility of the equipment manufacturer.
Unless noted otherwise, case temperature T
C
= +25°C±2°C.
The design, manufacturing process, and specifications of this device are subject
to change without notice.
7.
8.
Derived mathematically from one or more of the following directly measured
parameters: f
C
, IL, 3 dB bandwidth, f
C
versus T
C
, and C
O
.
Turnover temperature, T
O
, is the temperature of maximum (or turnover) fre-
quency, f
O
. The nominal frequency at any case temperature, T
C
, may be calcu-
lated from: f = f
O
[1 - FTC (T
O
-T
C
)
2
]. Typically,
oscillator
T
O
is 20°C less than
the specified
resonator
T
O
.
This equivalent RLC model approximates resonator performance near the reso-
nant frequency and is provided for reference only. The capacitance C
O
is the
static (nonmotional) capacitance between pin1 and pin 2 measured at low fre-
quency (10 MHz) with a capacitance meter. The measurement includes case
parasitic capacitance with a floating case. For usual grounded case applica-
tions (with ground connected to either pin 1 or pin 2 and to the case), add
approximately 0.25 pF to C
O
.
2.
9.
3.
4.
5.
6.
RF Monolithics, Inc.
Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com
http://www.rfm.com
RO2044-082802
Page 1 of 2
RFM [ RF MONOLITHICS, INC ]
