®
•
•
•
•
•
Ideal for European 857.65 MHz Transmitters
Very Low Series Resistance
Quartz Stability
Surface-Mount Ceramic Case with 21 mm
2
Footprint
Complies with Directive 2002/95/EC (RoHS)
RO2166E
RO2166E-1
RO2166E-2
Pb
The RO2166E is a true one-port, surface-acoustic-wave (SAW) resonator in a surface-mount ceramic case.
It provides reliable, fundamental-mode, quartz frequency stabilization of local oscillators operating at 857.65
MHz. This SAW is designed for 857.65 MHz superhet receivers with 10.7 MHz IF. Applications include
remote-control and wireless security receivers operating under ETSI-ETS 300 220 in Europe and under FTZ
17 TR 2100 in Germany.
857.65 MHz
SAW
Resonator
Absolute Maximum Ratings
CW RF Power Dissipation
DC Voltage Between Terminals
Case Temperature
Operating Temperature Range
Soldering Temperature (10 seconds / 5 cycles max.)
+0
±12
-40 to +125
-40 to +125
260
dBm
VDC
°C
°C
°C
SM3030-6 Case
3.0 X 3.0
Minimum
857.500
857.550
857.575
Typical
Maximum
857.800
857.750
857.725
±150
±100
±75
1.6
Units
MHz
Electrical Characteristics
Frequency (+25 °C)
Characteristic
Nominal Frequency
Sym
RO2166E
RO2166E-1
RO2166E-2
RO2166E
RO2166E-1
RO2166E-2
f
C
Notes
2, 3, 4,
5
Tolerance from 857.65 MHz
∆f
C
IL
Q
U
Q
L
T
O
f
O
FTC
|fA|
R
M
L
M
C
M
C
O
L
TEST
2, 5, 6
5, 6, 7
15
6, 7, 8
1
5
5, 6, 7,
9
5, 6, 9
2, 7
10
0.9
5607
310
25
f
C
0.032
10
kHz
dB
Insertion Loss
Quality Factor
Unloaded Q
50
Ω
Loaded Q
Temperature Stability
Turnover Temperature
Turnover Frequency
Frequency Temperature Coefficient
Frequency Aging
Absolute Value during the First Year
DC Insulation Resistance between Any Two Terminals
RF Equivalent RLC Model
Motional Resistance
Motional Inductance
Motional Capacitance
Transducer Static Capacitance
Test Fixture Shunt Inductance
Lid Symbolization (in addition to Lot and/or Date Codes)
Reel Size 7 Inch
Standard Reel Quantity
Reel Size 13 Inch
35
1.0
5.9
17
6.1
5.6
1.64
21.00
514 / YWWS
500 Pieces / Reel
3000 Pieces / Reel
°C
kHz
ppm/°C
2
ppm/yr
MΩ
Ω
µH
fF
pF
nH
CAUTION: Electrostatic Sensitive Device. Observe precautions for handling.
Notes:
1.
Frequency aging is the change in f
C
with time and is specified at +65°C or less.
Aging may exceed the specification for prolonged temperatures above +65°C.
Typically, aging is greatest the first year after manufacture, decreasing in subse-
quent years.
The center frequency, f
C
, is measured at the minimum insertion loss point,
IL
MIN
, with the resonator in the 50
Ω
test system (VSWR
≤
1.2:1). The shunt
inductance, L
TEST
, is tuned for parallel resonance with C
O
at f
C
. Typically, f
OS-
CILLATOR
or f
TRANSMITTER
is approximately equal to the resonator f
C
.
One or more of the following United States patents apply: 4,454,488 and
4,616,197.
Typically, equipment utilizing this device requires emissions testing and govern-
ment approval, which is the responsibility of the equipment manufacturer.
Unless noted otherwise, case temperature T
C
= +25°C±2°C.
The design, manufacturing process, and specifications of this device are subject
to change without notice.
Derived mathematically from one or more of the following directly measured
8.
parameters: f
C
, IL, 3 dB bandwidth, f
C
versus T
C
, and C
O
.
Turnover temperature, T
O
, is the temperature of maximum (or turnover) fre-
quency, f
O
. The nominal frequency at any case temperature, T
C
, may be calcu-
lated from: f = f
O
[1 - FTC (T
O
-T
C
)
2
]. Typically
oscillator
T
O
is approximately
equal to the specified
resonator
T
O
.
This equivalent RLC model approximates resonator performance near the reso-
nant frequency and is provided for reference only. The capacitance C
O
is the
static (nonmotional) capacitance between the two terminals measured at low
frequency (10 MHz) with a capacitance meter. The measurement includes para-
sitic capacitance with "NC” pads unconnected. Case parasitic capacitance is
approximately 0.05 pF. Transducer parallel capacitance can by calculated as:
C
P
≈
C
O
- 0.05 pF.
Tape and Reel Standard for ANSI / EIA 481.
This product complies with directive 2002/95/EC of the European Parlament and
of the Council of 27 January 2003 on the restriction of the use of certain hazard-
ous substances in electrical and electronic equipment.
E-mail: info@rfm.com
http://www.rfm.com
RO2166E-113004
Page 1 of 2
2.
9.
3.
4.
5.
6.
7.
10.
11.
RF Monolithics, Inc.
Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
RFM [ RF MONOLITHICS, INC ]
