®
SF2024D-1
467.751 MHz
Pb
Value
+10
30
-40 to +85
260°C for 30 s
Units
dBm
VDC
°C
•
•
•
•
•
Designed for SDARS Receiver IF Application
Low Insertion Loss
3.8 X 3.8 X 1.0 mm Surface-Mount Case
Differential Input and Output
Complies with Directive 2002/95/EC (RoHS)
Rating
Maximum Incident Power in Passband
Max. DC voltage between any 2 terminals
Storage Temperature Range
Suitable for lead-free soldering - Max Soldering Profile
SAW Filter
Absolute Maximum Ratings
SM3838-8
Electrical Characteristics
Characteristic
Center Frequency
Insertion Loss
Amplitude Ripple (p-p)
Sym
f
C
IL
fc-6.250 to fc-4.3925 MHz
fc-4.3925 to fc-2.535 MHz
fc-2.5350 to fc-0.025 MHz
fc+0.025 to fc+2.535 MHz
fc+2.5350 to fc+4.3925 MHz
fc+4.3925 to fc+6.250 MHz
Notes
1
Min
467.704
Typ
467.751
13
0.7
0.8
0.9
1.1
1.1
1.2
13.0
Max
467.798
15.5
2.0
2.0
2.0
2.0
2.0
2.0
Units
MHz
dB
dB
1, 2
Pass bandwidth of -2.0dB centered at fc
Pass bandwidth of -3 dB
Low Side Attenuation between 455.751 to 457.251 MHz (fc-10.5 MHz)
Low Side Attenuation F<455.751 MHz
High Side Attenuation between 476.751 to 479.751 MHz (fc+9.0 MHz)
High Side Attenuation F>479.751 MHz
Temperature Coefficient of frequency
Delay Ripple (p-p)
fc-6.250 to fc-4.3925 MHz
fc-4.3925 to fc-2.535 MHz
fc-2.5350 to fc-0.025 MHz
fc+0.025 to fc+2.535 MHz
fc+2.5350 to fc+4.3925 MHz
fc+4.3925 to fc+6.250 MHz
Source Impedance
Load Impedance
Case Style
Lid Symbolization (YY=year, WW=week, S=shift) See note 4
Operating Temperature
Notes:
1. Unless noted otherwise, all specifications apply over the operating
temperature range with filter soldered to the specified demonstration
board with impedance matching to 50
Ω
and measured with 50
Ω
network analyzer.
2. Unless noted otherwise, all frequency specifications are referenced
to the nominal center frequency, fc.
3. Rejection is measured as attenuation below the minimum IL point in
the passband. Rejection in final user application is dependent on
PCB layout and external impedance matching design. See Applica-
tion Note No. 42 for details.
4. The design, manufacturing process, and specifications of this filter
are subject to change.
MHz
32
32
20
32
1, 2, 3
-18
110
140
120
120
100
140
dB
ppm/K
ZS
ZL
6
70
70
75
ns
80
80
85
150
Ω
150
Ω
SM3838-8 3.8 x 3.8 mm Nominal Footprint
619 YWWS
-40
+85
°C
5.
6.
7.
8.
Tape and Reel Standard Per ANSI / EIA 481.
US and international patents may apply.
RFM, stylized RFM logo, and RF Monolithics, Inc. are registered
trademarks of RF Monolithics, Inc.
©Copyright 1999, RF Monolithics Inc.
Electrostatic Sensitive Device. Observe precautions for handling.
RF Monolithics, Inc.
Phone: (972) 233-2903
Fax: (972) 387-8148
RFM Europe
Phone: 44 1963 251383
Fax: 44 1963 251510
©1999 by RF Monolithics, Inc. The stylized RFM logo are registered trademarks of RF Monolithics, Inc.
E-mail: info@rfm.com
http://www.rfm.com
SF2024D-1-1/29/08 Ver 0.1
Page 1 of 5
RFM [ RF MONOLITHICS, INC ]
