RF2304
4
Typical Applications
• Receive or Transmit Low-Noise Amplifiers
• FDD and TDD Communication Systems
• Commercial and Consumer Systems
• Portable Battery Powered Equipment
• Wireless LAN
• ISM Band Applications
GENERAL PURPOSE LOW-NOISE AMPLIFIER
Product Description
The RF2304 is a low-noise small-signal amplifier. The
device is manufactured on a low-cost Gallium Arsenide
MESFET process, and has been designed for use as a
gain block in high-end communication systems operating
from less than 300MHz to above 2.5GHz. With +6dBm
output power, it may also be used as a driver in transmit-
ter applications, or in highly linear receivers. The device is
packaged in an 8-lead plastic package and is self-con-
tained, requiring just an inductor and blocking capacitors
to operate. The +6dBm output power, combined with the
1.8dB noise figure at 900MHz allows excellent dynamic
range for a variety of receive and transmit applications.
0.008
0.004
0.018
0.014
-A-
4
GENERAL PURPOSE
AMPLIFIERS
0.196
0.189
0.050
0.157
0.150
0.244
0.229
Dimensions in mm
0.068
0.053
8° MAX
0° MIN
0.034
0.016
0.009
0.007
NOTES:
1. Shaded lead is Pin 1.
2. All dimensions are excluding
mold flash.
3. Lead coplanarity -
0.005 with respect to datum "A".
Optimum Technology Matching® Applied
Si BJT
Si Bi-CMOS
GaAs HBT
SiGe HBT
Si CMOS
ü
GaAs MESFET
Package Style: SOIC-8
Features
• Single 2.7V to 6.0V Supply
• 6dBm Output Power
• 8dB Small Signal Gain at 900MHz
GND 1
GND 2
RF IN 3
GND 4
8 NC
7 VDD
6 RF OUT
5 GND
• 1.8dB Noise Figure at 900MHz
• Low DC Current Consumption of 5mA
• 300MHz to 2500MHz Operation
Ordering Information
RF2304
RF2304 PCBA
General Purpose Low-Noise Amplifier
Fully Assembled Evaluation Board
Functional Block Diagram
RF Micro Devices, Inc.
7628 Thorndike Road
Greensboro, NC 27409, USA
Tel (336) 664 1233
Fax (336) 664 0454
http://www.rfmd.com
Rev A5 010717
4-57