FM R
EMOTE
C
ONTROL
S
YSTEM
.
FEATURES
FM-RCH
N
-XXXRS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
COMPLETE REMOTE CONTROL SYSTEM
IP64 RATED DEC ENCLOSURE.
MINIMAL INSTALLATION VIA SCREW TERMINALS.
240Vac OR 12Vdc SUPPLY.
UP TO 4 CHANNELS.
LED INDICATION OF TRANSMISSION.
LED INDICATION OF EACH OUTPUT CHANNEL.
3 MOMENTARY 2 TOGGLED OUTPUTS
1 PROGRAMMABLE TIMED OUTPUTS (10secs-5mins).
RELAY CONTACTS 5A@ 240Vac.
REQUIRES NO RADIO LICENCE.
RANGE UP TO 200 METRES
HIGH SECURITY PROTOCOL.
IP64 RATED ENCLOSURE
CAN BE USED WITH FM-ECA AUTO Tx.
DESCRIPTION
The FM-RCHn-XXXRS is a complete remote control system supplied ready to operate. Installation requires
connections to be made only to the power supply which can be 240Vac or 12Vdc.
Available in options of 1 - 4 channels. It provides 5A rated relays at 240Vac with either momentary or latching
operation. The system incorporates a highly secure ‘code hopping’ transmission protocol to prevent grabbing
and scanning of the data.
The outputs may be programmed to operate in latching or momentary mode. (there is a maximum of two
latching or three momentary outputs). A timed output feature is also available on output four.
The system has a range of up to 200 metres in direct line of sight, and requires minimal installation. The
decoder has an easy learn feature which enables it to learn the ‘signature code’ of individual
transmitter/encoders switches.(These are memorised even if the power is removed).
The decoder may also be used in conjunction with the FM-ECAC auto transmitting encoder. (RS Stock code
226-3398)
The system is supplied ready to operate with the remote transmitter/encoder. The decoder is supplied in an
IP64 rated enclosure.
BLOCK DIAGRAM
TRANSMITTER
ENCODER
RECEIVER
DECODER
RLY 1
(RLY 2)
(RLY 3)
(RLY 4)
SUPPLY
240Vac
or 12V DC
RELAY
OUTPUTS
(COM,
NO, NC)
DS000032 Rev 1.5
July ‘99
©1999
REG No 277 4001, ENGLAND.
Page 1
RFSOLUTIONS [ RFSOLUTIONS.LTD ]
