R6-8684-20 参数 Datasheet PDF下载

Radio Transmitter & Receiver Modules

Connection Diagram / Dimensions QFMT6 Transmitter

3.4 mm

31.5 mm

T6 / R6

CE

10 mm

T6

(Pin spacings 2.54 mm)

19.57 mm

1

2

3

4

5

1.5mm

Pin Descriptions

RF GND

(pin 1)

RF Ground pin is internally connected to pin 4 (0V) This pin should ideally be connected to the nearest

ground plane (e.g. coax braid, main PCB ground plate etc.)

RF OUT

(pin 2)

50Ω RF antenna output. To achieve best results the antenna impedance must match that of the module.

V

CC

(pin 3)

+Ve supply pin (3.0 to 9.0 volts). The module will generate RF when V

CC

is present. It is strongly

recommended that a 100nF capacitor decouples the supply rail as close as possible to this pin.

GND

(pin 4)

Supply and data ground connection, connected to pin 1.

Data IN

(pin 5)

This input has an impedance of 47KΩ and should ideally be driven by a CMOS logic drive or compatible.

The drive circuitry should be supplied with the same supply voltage as the Tx module.

Ordering Information:

Part No

T6-8684-20

T6-8684-64

T6-86985

T6-915-20

T6-915-64

Description

SIL Transmitter 868.4MHz 20Kbps Data rate

SIL Transmitter 868.4MHz 64Kbps Data rate

SIL Transmitter 869.85 MHz

SIL Transmitter 915.0 MHz 20Kbps Data rate

SIL Transmitter 915.0 MHz 64Kbps Data rate

DS306-3

May 03

2003

REG No 277 4001, England.

Page 2