VER:03
1 / 2
•
1 WATT UNREGULATED OUTPUT POWER
•
SINGLE-IN-LINE PACKAGE (SIP)
•
HIGH EFFICIENCY FOR LOW POWER APPLICATION
•
UL 94-V0 NON-CONDUCTED CASE
•
INTERNAL INPUT & OUTPUT FILTER
•
INPUT / OUTPUT ISOLATION UP TO 3KVDC
•
SUFFIX-N ISOLATION LEVEL REINFORCE
The DU1P0 series are the standard building blocks for on-board distributed power
UL E193009
TUV R50025187
CB JPTUV-006003
CE MARK
systems. They are ideally suited to providing single and dual supplies on primarily
digital boards with added benefit of galvanic isolation to reduce switching noise. All of
the rated power may be drawn from a single pin provided the total load does not
exceed 1 watt.
T E C H N I C A L S P E C I F I C AT I O N
OUTPUT SPECIFICATIONS
Output power
Voltage accuracy
Minimum load (Note 1)
Line regulation
Load regulation
Ripple and noise
Temperature coefficient
Short circuit protection
LL to HL at Full Load
20% to 100% FL
20MHz bandwidth
5V output
others
Full load and nominal Vin
All specifications are typical at nominal input, full load and 25ºC otherwise noted
GENERAL SPECIFICATIONS
1 Watt max
± 5%
10% of FL
1.3% / 1% of Vin
± 10%
± 8%
100mVp-p
±0.1% / ºC, max
Short term
Efficiency
Isolation voltage
Isolation resistance
Isolation capacitance
Switching frequency
Approvals and standard
Case material
Base material
Potting material
Input to Output
Standard
Suffix-N
See table
1000VDC, min
3000VDC, min
10 ohms, min
30pF, max
60KHz, min
IEC60950, UL60950, EN60950
Non-conductive black plastic
None
Epoxy (UL94-V0)
0.77 X 0.24 X 0.40 Inch
(19.6 X 6.0 X 10.2 mm)
2.0g (0.071oz)
1.471 x 10 hrs
7
9
INPUT SPECIFICATIONS
Input voltage range
5V nominal input
12V nominal input
15V nominal input
24V nominal input
4.5 – 5.5VDC
10.8 – 13.2VDC
13.5 – 16.5VDC
21.6 – 26.4VDC
Capacitor
Dimensions
Weight
MTBF (Note 2)
Input filter
ENVIRONMENTAL SPECIFICATIONS
Operating temperature range
Storage temperature range
Thermal shock
Vibration
Relative humidity
-25ºC ~ +85ºC (with derating)
-55ºC ~ +105ºC
MIL-STD-810D
10~55Hz, 10G, 30minutes along X,Y and Z
5% to 95% RH
ELECTRONIC COMPONENTS
RSG
■
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de
www.rsg-electronic.de
■
■
■
■
■
Änderungen vorbehalten / subject to change without notice
RSG [ RSG ELECTRONIC COMPONENTS GMBH ]
