ELECTRONIC COMPONENTS
RSG
■
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de
www.rsg-electronic.de
■
■
■
■
■
Änderungen vorbehalten / subject to change without notice
65W Dual Output Switching Power Supply
Features :
RPD-65
series
Universal AC input/Full range
12V or 24V high peak output current capability
Optional L-Bracket and cover
Low leakage current<1mA
Protections:Short circuit/Over load/Over voltage
60W free air convection, 77W with 18CFM forced air
100% full load burn-in test
Fixed switching frequency at 65KHz
2 years warranty
SPECIFICATION
MODEL
OUTPUT NUMBER
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
PEAK LOAD
RATED POWER
OUTPUT
OUTPUT POWER (max.)
VOLTAGE ADJ. RANGE
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER LOAD
PROTECTION
OVER VOLTAGE
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE
EMC
(Note 4)
RPD-65C
CH1
12V
4.5A
0 ~ 5.8A
Note.4
7.5A
RPD-65D
CH2
5V
1.2A
0 ~ 1.5A
Rated load
CH1
24V
2.25A
0 ~ 2.9A
3.75A
60W
50mVp-p
5.0%
1.0%
5.0%
150mVp-p
CH1:22.8 ~ 26.4V
2.0%
1.0%
2.0%
50mVp-p
5.0%
1.0%
5.0%
CH2
5V
1.2A
0 ~ 1.5A
Rated load
60W
Rated output power for convection; 77W with 18CFM min. forced air
RIPPLE & NOISE (max.)
Note.2
120mVp-p
CH1:11.4 ~ 12.8V
VOLTAGE TOLERANCE
Note.3
2.0%
1.0%
2.0%
800ms, 20ms at full load
20ms at full load
90 ~ 264VAC
47 ~ 440Hz
79%
1.5A/115VAC
127 ~370VDC
81%
0.9A/230VAC
50A/230VAC
COLD START 25A/115VAC
<1mA
90 ~ 125W output power
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
CH1:27.6 ~ 32.4V
CH1:13.8 ~ 16.2V
Protection type : Hiccup mode, recovers automatically after fault condition is removed.
-20 ~ +60
-40 ~ +85
(Refer to output load derating curve)
, 10 ~ 95% RH
20 ~ 90% RH non-condensing
0.04%/ (0 ~ 50 ) on CH1 output
10 ~ 500Hz, 2G 10min./1cycle, Period for 60min.each along X, Y, Z axes
UL60950-1, TUV EN60950-1 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
MTBF
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
288.1K hrs min. MIL-HDBK-217F (25 )
PCB:127*76*28mm (L*W*H) with optional CASE:130*84.4*37mm (L*W*H)
0.24Kg; 63pcs/16Kg/1.35CUFT
OTHERS
DIMENSION
PACKING
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. 10% duty cycle maximum within every second. Average output power should not exceed the rated power, output voltage above 90% DC voltage.
5. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
File Name:RPD-65-SPEC 2006-01-27
RSG [ RSG ELECTRONIC COMPONENTS GMBH ]
