ELECTRONIC COMPONENTS
RSG
■
RSG Electronic Components GmbH Sprendlinger Landstr. 115 D-63069 Offenbach/Germany
Tel. +49 69 984047-0 Fax +49 69 984047-77 info@rsg-electronic.de
www.rsg-electronic.de
■
■
■
■
■
Änderungen vorbehalten / subject to change without notice
75W Single Output with PFC Function
Features :
Universal AC input / Full range
SP-75
Built-in active PFC function, PF>0.93
Protections:Short circuit/Over load/Over voltage
Built-in constant current limiting circuit
Low profile: 33mm thickness
LED indicator for power on
100% full load burn-in test
series
Fixed switching frequency at PFC:67KHz PWM:134KHz
3 years warranty
SPECIFICATION
MODEL
DC VOLTAGE
RATED CURRENT
CURRENT RANGE
RATED POWER
OUTPUT
VOLTAGE ADJ. RANGE
VOLTAGE TOLERANCE
Note.3
LINE REGULATION
LOAD REGULATION
SETUP, RISE TIME
HOLD TIME (Typ.)
VOLTAGE RANGE
FREQUENCY RANGE
POWER FACTOR (Typ.)
INPUT
EFFICIENCY (Typ.)
AC CURRENT (Typ.)
INRUSH CURRENT (Typ.)
LEAKAGE CURRENT
OVER LOAD
SP-75-3.3
3.3V
15A
0 ~ 15A
49.5W
SP-75-5
5V
15A
0 ~ 15A
75W
80mVp-p
2.0%
0.5%
1.0%
SP-75-7.5
7.5V
10A
0 ~ 10A
75W
80mVp-p
2.0%
0.5%
1.0%
SP-75-12
12V
6.3A
0 ~ 6.3A
75.6W
80mVp-p
2.0%
0.5%
0.5%
SP-75-13.5
13.5V
5.6A
0 ~ 5.6A
75.6W
80mVp-p
2.0%
0.5%
0.5%
SP-75-15
15V
5A
0 ~ 5A
75W
80mVp-p
2.0%
0.5%
0.5%
SP-75-24
24V
3.2A
0 ~ 3.2A
76.8W
100mVp-p
1.0%
0.5%
0.5%
SP-75-27
27V
2.8A
0 ~ 2.8A
75.6W
100mVp-p
1.0%
0.5%
0.5%
SP-75-48
48V
1.6A
0 ~ 1.6A
76.8W
100mVp-p
1.0%
0.5%
0.5%
RIPPLE & NOISE (max.)
Note.2
80mVp-p
2.0%
0.5%
1.0%
3.14 ~ 3.63V 4.75 ~ 5.5V
7.13 ~ 8.25V 11.4 ~ 13.2V 12.8 ~ 14.9V 14.3 ~ 16.5V 22.8 ~ 26.4V 25.7 ~ 29.7V 45.6 ~ 52.8V
600ms, 60ms at full load
36ms at full load
Note.5
85 ~ 264VAC
120 ~ 370VDC
0.96/115VAC at full load
74%
77%
78%
79%
80%
80%
80%
47 ~ 63Hz
PF>0.93/230VAC
68%
72%
1.3A/115VAC
0.7A/230VAC
COLD START 30A/230VAC
<2mA / 240VAC
105 ~ 150% rated output power
Protection type : Constant current limiting, recovers automatically after fault condition is removed
PROTECTION
3.8 ~ 4.46V 5.75 ~ 6.75V 8.63 ~ 10.13V 13.8 ~ 16.2V 15.53 ~ 18.23V 17.25 ~ 20.25V 27.6 ~ 32.4V 31.05 ~ 36.45V 55.2 ~ 64.8V
OVER VOLTAGE
Protection type : Shut down o/p voltage, re-power on to recover
FUNCTION REMOTE CONTROL(OPTION)
CN3:4 ~ 10VDC POWER OFF, <0 ~ 0.8VDC POWER ON
-10 ~ +60 (Refer to output load derating curve)
WORKING TEMP.
WORKING HUMIDITY
ENVIRONMENT STORAGE TEMP., HUMIDITY
TEMP. COEFFICIENT
VIBRATION
SAFETY STANDARDS
WITHSTAND VOLTAGE
SAFETY & ISOLATION RESISTANCE
EMC
(Note 4)
20 ~ 90% RH non-condensing
-20 ~ +85
, 10 ~ 95% RH
0.05%/ (0 ~ 50
10 ~ 500Hz, 2G 10min./1cycle, 60min. each along X, Y, Z axes
UL60950-1, TUV EN60950-1 Approved
I/P-O/P:3KVAC I/P-FG:1.5KVAC O/P-FG:0.5KVAC
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC
EMI CONDUCTION & RADIATION
Compliance to EN55022 (CISPR22) Class B
HARMONIC CURRENT
Compliance to EN61000-3-2,-3
EMS IMMUNITY
Compliance to EN61000-4-2,3,4,5,6,8,11; ENV50204, EN55024, Light industry level, criteria A
MTBF
208.8K hrs min. MIL-HDBK-217F (25 )
DIMENSION
PACKING
179*97*33mm (L*W*H)
0.58Kg; 20pcs/12Kg/0.64CUFT
OTHERS
NOTE
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature.
2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor.
3. Tolerance : includes set up tolerance, line regulation and load regulation.
4. The power supply is considered a component which will be installed into a final equipment. The final equipment must be re-confirmed that it still meets
EMC directives.
5. Derating may be needed under low input voltages. Please check the derating curve for more details.
File Name:SP-75-SPEC 2006-04-13
RSG [ RSG ELECTRONIC COMPONENTS GMBH ]
