Primary lithium batteries
LS 33600LM
3.6V Primary lithium-thionyl chloride (Li-SOCl
2
)
High energy
D-size bobbin cell
with low magnetic signature
For magnetism-sensitive applications
requesting good voltage response
and operating life in - 60°C/+ 85°C
environments.
Key features
High and stable operating voltage
q
Low self-discharge rate
(less than 1% after 1 year of
storage at + 20°C)
q
Stainless steel construction
q
Hermetic glass-to-metal sealing
q
Built-in safety vent
q
Non-flammable electrolyte
q
Restricted for transport (Class 9)
q
Typical magnetic signatures:
200 nT (2 mGauss) at 6 mm
10 nT (0.1 mGauss) at 127 mm
3 nT (0.03 mGauss) at 300 mm
q
Cell size references
Electrical characteristics
(typical values relative to cells stored for one year or less at + 30°C max.)
Nominal capacity
(at 5 mA + 20°C 2.0V cut off. The capacity restored by the cell varies
according to current drain, temperature and cut off).
Open circuit voltage
Nominal voltage
(at + 20°C)
(at 0.7mA + 20°C)
UM1 – R20 – D
17.0 Ah
3.67V
3.6V
Pulse capability: Typically up to 400 mA
(400 mA/0.1 second pulses,
drained every 2 mn at + 20°C from undischarged cells with 10 µA base
current, yield voltage readings above 3.0V. The readings may vary according
to the pulse characteristics, the temperature, and the cell's previous history.
Fitting the cell with a capacitor may be recommended in severe conditions.
Consult Saft)
Continuous current permitting 50% of the nominal capacity
to be achieved at + 20°C with 2.0V cut off.
(Higher currents possible, consult Saft)
Storage
(recommended)
(for more severe conditions, consult Saft)
250 mA
+ 30°C (+ 86°F) max
- 60°C/+ 85°C
(- 76°F/+ 185°F)
Main applications
q
q
q
q
Seismic surveying
Oceanographic instrumentation
Buoys
Scientific equipment
etc...
Operating temperature range
(Operation above ambient T may lead to reduced capacity and
lower voltage readings at the beginning of pulses. Consult Saft)
Optional upon request
q
q
Specific cell terminations
Multi-cell battery packs
Physical characteristics
Diameter
(max)
Height
(max)
Typical weight
Li metal content
33.4 mm (1.32 in)
60.2 mm (2.37 in)
90 g (3.2 oz)
approx. 4.5 g
September 2004