PM9103AP
SINGLE PHASE POWER/ENERGY METERING MODULE
SERIAL INTERFACE
FEATURES
n
sames
SA9103 / SA9603C APPLICATION NOTE
Performs both power and energy
measurement
Meets the accuracy requirements for
Class 1 AC Watt hour meters
Protected against ESD
Total power consumption rating below
500mW (excluding current sensing)
n
Uses a shunt resistor for current
sensing
Operates over a wide temperature
range
Serial interface having a RS232
Protocol
n
n
n
n
n
DESCRIPTION
The SAMES single phase power/energy metering module, the PM9103AP, provides
energy data via a RS232 compatible serial interface.
Energy consumption is determined by the power measurement being integrated over
time.
The method of calculation takes the power factor into account.
The output of this innovative universal power/energy meter is ideally suited for energy
calculations in applications using a µ-controller.
The application utilises the SAMES SA9103CP, SA9103EP or SA9603CP power
metering integrated circuits for power measurement.
As a safety measure, this application shows the current sensor connected to the neutral
line. In practice, the live line may be used for current sensing, provided that the supply
connections (MAINS) are reversed on the module.
1/10
4309
PDS038-SA9103-001
REV.C
11-08-98
SAMES [ SAMES ]
