Power entry modules without line filter
CMF3, CMF6
IEC Appliance Inlet C6 with Line Switch 1-pole
CMF3
C6
70° C
Description
- Panel Mount:
Screw-on mounting on PCB, from top or bottom
- 2 Functions:
Appliance Inlet Protection class I, Line Switch 1-pole
- For PCB mounting
- Alternative: protection class II version CMF1, CMF4; CMF2, CMF5
- Easy mounting with center bolt and snapper or srewed on PCB or
housing
- Electrical connection done on the PCB
- Bi-positioning of the switch from left or right side, Standard CMF with
switch on right side
- With or without rear-side insulation cover
- Qualified for use in equipment according IEC/EN 60950
Characteristics
Other versions on request
References
Weblinks
- Line switch with other rocker marking
- Line switch on left of inlet
Technical Data
Ratings IEC
Ratings UL/CSA
Dielectric Strength
2.5 A / 250 VAC; 50 Hz
6 A / 125 VAC; 60 Hz
> 2.3 kVAC between L-N
> 2.8 kVAC between L/N-PE
(1 min/50 Hz)
-25 °C to 70 °C
from front side IP 40 acc. to IEC 60529
Suitable for appliances with protection
class 1 acc. to IEC 61140
PCB 1.6 mm
Additional ground terminal
Thermoplastic, black, UL 94V-0
Appliance Inlet
C6 acc. to IEC/EN 60320-1,
UL 498, CSA C22.2 no. 42 (for cold
conditions) pin-temperature 70 °C,
2.5 A, Protection Class 1
Rocker switch 1-pole, non-illuminated,
acc. to IEC 61058-1
Line Switch
Allowable Operation Temp.
Degree of Protection
Protection Class
Terminal
Material: Housing
Connectors
SCHURTER [ SCHURTER INC. ]
