GP2A200LCS0F Series
GP2A200LCS0F
Series
Detecting Distance : 2 to 22mm
*OPIC Output,
Reflective Photointerrupter with
Connector
■
Description
GP2A200LCS0F Series
are OPIC output, reflective
photointerrupters with emitter and detector facing the
same direction in a molding that provides non-contact
sensing. This family of devices uses light modulation to
reduce the affects of disturbing light, and the sensor is
optimized to work in the selected focal distance. A 3-pin
connector is included to allow remote-mount or off-board
designs.
■
Agency approvals/Compliance
1. Compliant with RoHS directive
■
Applications
1. General purpose detection of paper presence or mo-
tion.
2. Example: PPC, FAX, Printer
■
Features
1. Reflective with OPIC Light Modulated Output
2. Highlights :
• Includes additional screw
fi
xing holes
• Position pin to prevent mis-alignment
• Long focal distance
3. Key Parameters :
• Detecting distance : 2 to 22mm (White paper)
5 to 15mm (Black paper)
• Undetecting distance : over 90mm (White paper)
• Connector :
GP2A200LCS0F
; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A200LCSCF
; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A240LCS0F
; Tyco Electronics AMP K.K.
(PN : 292133-3)
GP2A210LCSJF
; Tyco Electronics AMP K.K.
(PN : 4-292133-3)
4. Lead free and RoHS directive compliant
* "OPIC"(Optical IC) is a trademark of the SHARP Corporation. An OPIC consists of a light-detecting element and a signal-
processing
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D3-A05101EN
Date Jun. 30. 2005
© SHARP Corporation
SHARP [ SHARP ELECTRIONIC COMPONENTS ]
