PR29MF1xNSZ Series/PR39MF1xNSZ Series/PR49MF11NSZ Series
PR29MF1xNSZ Series
PR39MF1xNSZ Series
PR49MF11NSZ Series
Zero cross type is also available. (PR29MF2xNSZ
Series/
PR39MF2xNSZ Series)
∗
I
T
(rms)≤0.9A, Non-Zero Cross type
DIP 8pin
Triac output SSR
■
Description
PR29MF1xNSZ Series, PR39MF1xNSZ Series
and
PR49MF11NSZ Series
Solid State Relays (SSR) are
an integration of an infrared emitting diode (IRED), a
Phototriac Detector and a main output Triac. These
devices are ideally suited for controlling high voltage
AC loads with solid state reliability while providing
4.0kV isolation (V
iso
(rms)) from input to output.
■
Agency approvals/Compliance
1. Recognized by UL508 (except for
PR49MF11NSZ
Series),
file No. E94758 (as model No.
R29MF1/
R39MF1)
2. Approved by CSA 22.2 No.14 (except for
PR49MF11NSZ Series),
file No. LR63705 (as model
No.
R29MF1/R39MF1)
3. Optionary available VDE approved
(∗)
(DIN EN 60747-5-
2), file No.40008898 (only for
PR39MF1xNSZ Series
as model No.
R39MF1)
4. Package resin : UL flammability grade (94V-0)
(∗)
■
Features
1. Output current, I
T
(rms)≤0.9A
2. Non-zero crossing functionary
3. 8 pin DIP package (SMT gullwing also available)
4. High repetitive peak off-state voltage
(V
DRM
: 800V,
PR49MF11NSZ Series)
(V
DRM
: 600V,
PR39MF1xNSZ Series)
(V
DRM
: 400V,
PR29MF1xNSZ Series)
5. I
FT
ranks available (see Model Line-up in this
datasheet)
6. Superior noise immunity
(dV/dt : MIN. 100V/µs,
PR29MF1xNSZ Series
and
PR39MF1xNSZ Series)
(dV/dt : MIN. 50V/µs,
PR49MF11NSZ Series)
7. Response time, t
on
: MAX. 100µs
8. Lead-free terminal components are also available
(see Model Line-up section in this datasheet)
9. High isolation voltage between input and output
(V
iso
(rms) : 4.0kV)
DIN EN60747-5-2 : successor standard of DIN VDE0884.
Up to Date code "RD" (December 2003), approval of DIN
VDE0884.
From Date code "S1" (January 2004), approval of DIN
EN60747-5-2.
■
Applications
1. Isolated interface between high voltage AC devices
and lower voltage DC control circuitry.
2. Switching motors, fans, heaters, solenoids, and
valves.
3. Phase or power control in applications such as
lighting and temperature control equipment.
Notice The content of data sheet is subject to change without prior notice.
In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP
devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
1
Sheet No.: D4-A00601EN
Date Mar. 31. 2004
© SHARP Corporation
SHARP [ SHARP ELECTRIONIC COMPONENTS ]
