SE2527L
2.4 GHz Power Amplifier with Power Detector
Preliminary Information
Applications
DSSS 2.4 GHz WLAN (IEEE802.11b)
OFDM 2.4 GHz WLAN (IEEE802.11g)
Access Points, PCMCIA, PC cards
Product Description
The SE2527L is a 2.4 GHz power amplifier designed
for use in the 2.4 GHz ISM band for wireless LAN
applications. The device incorporates a power
detector for closed loop monitoring of the output
power.
The SE2527L also offers a high power mode by
operating at 5 V. This provides an extra 2 dB of
improved EVM performance.
The SE2527L includes a digital enable control for
device on/off control.
The device is pin for pin compatible to SiGe’s
SE2524L, allowing both devices to share the same
application board with only a few component changes
required. This provides users with both a high and
low power solution without changing the layout.
The SE2527L temperature compensated power
detector is highly immune to mismatch at its output
with less than 1.5 dB of variation with a 2:1 mismatch.
Features
Single 3.3 V Supply Operation
o
21 dBm, EVM = 3 %, 802.11g, OFDM 54
Mbps
o
24 dBm, ACPR < -32 dBc, 802.11b
Dual Supply Operation
o
23 dBm, EVM = 3 %, 802.11g, OFDM 54
Mbps
o
25 dBm, ACPR < -32 dBc, 802.11b
32 dB Gain
Pin for pin compatible to the SE2525L
Integrated temperature compensated power
detector
Integrated power amplifier enable pin (V
EN
)
Lead Free and RoHS compliant
Small package: 16 pin 4 mm x 4 mm x 0.9 mm
QFN
Ordering Information
Part Number
SE2527L
SE2527L-R
SE2527L-AK1
Package
16 Pin QFN
16 Pin QFN
Application Kit
Remark
Samples
Tape and Reel
Standard
Functional Block Diagram
V
CC0
V
EN
Bias Generator
IN
Stage 1
Stage 2
Stage 3
OUT/V
CC3
Detector
V
CC1
V
CC2
V
DET
OUT
Figure 1: Functional Block Diagram
157-DST-01
Rev 1.3
May-26-2009
QA041206
1 of 2