欢迎访问ic37.com |
会员登录 免费注册
发布采购

C8051F310 参数 Datasheet PDF下载

C8051F310图片预览
型号: C8051F310
PDF下载: 下载PDF文件 查看货源
内容描述: 8/16 KB ISP功能的Flash MCU系列 [8/16 kB ISP Flash MCU Family]
分类和应用: 微控制器和处理器
文件页数/大小: 228 页 / 2504 K
品牌: SILABS [ SILICON LABORATORIES ]
 浏览型号C8051F310的Datasheet PDF文件第93页浏览型号C8051F310的Datasheet PDF文件第94页浏览型号C8051F310的Datasheet PDF文件第95页浏览型号C8051F310的Datasheet PDF文件第96页浏览型号C8051F310的Datasheet PDF文件第98页浏览型号C8051F310的Datasheet PDF文件第99页浏览型号C8051F310的Datasheet PDF文件第100页浏览型号C8051F310的Datasheet PDF文件第101页  
C8051F310/1/2/3/4/5/6/7
8.3.5. Interrupt Register Descriptions
The SFRs used to enable the interrupt sources and set their priority level are described below. Refer to the
data sheet section associated with a particular on-chip peripheral for information regarding valid interrupt
conditions for the peripheral and the behavior of its interrupt-pending flag(s).
SFR Definition 8.7. IE: Interrupt Enable
R/W
R/W
R/W
R/W
R/W
R/W
R/W
R/W
Reset Value
EA
Bit7
ESPI0
Bit6
ET2
Bit5
ES0
Bit4
ET1
Bit3
EX1
Bit2
ET0
Bit1
EX0
Bit0
(bit addressable)
00000000
SFR Address:
0xA8
Bit7:
Bit6:
Bit5:
Bit4:
Bit3:
Bit2:
Bit1:
Bit0:
EA: Enable All Interrupts.
This bit globally enables/disables all interrupts. It overrides the individual interrupt mask set-
tings.
0: Disable all interrupt sources.
1: Enable each interrupt according to its individual mask setting.
ESPI0: Enable Serial Peripheral Interface (SPI0) Interrupt.
This bit sets the masking of the SPI0 interrupts.
0: Disable all SPI0 interrupts.
1: Enable interrupt requests generated by SPI0.
ET2: Enable Timer 2 Interrupt.
This bit sets the masking of the Timer 2 interrupt.
0: Disable Timer 2 interrupt.
1: Enable interrupt requests generated by the TF2L or TF2H flags.
ES0: Enable UART0 Interrupt.
This bit sets the masking of the UART0 interrupt.
0: Disable UART0 interrupt.
1: Enable UART0 interrupt.
ET1: Enable Timer 1 Interrupt.
This bit sets the masking of the Timer 1 interrupt.
0: Disable all Timer 1 interrupt.
1: Enable interrupt requests generated by the TF1 flag.
EX1: Enable External Interrupt 1.
This bit sets the masking of External Interrupt 1.
0: Disable external interrupt 1.
1: Enable interrupt requests generated by the /INT1 input.
ET0: Enable Timer 0 Interrupt.
This bit sets the masking of the Timer 0 interrupt.
0: Disable all Timer 0 interrupt.
1: Enable interrupt requests generated by the TF0 flag.
EX0: Enable External Interrupt 0.
This bit sets the masking of External Interrupt 0.
0: Disable external interrupt 0.
1: Enable interrupt requests generated by the /INT0 input.
Rev. 1.7
97