Si3056
Si3018/19/10
ꢀ
Updated "3.Bill of Materials" on page 19.
Revision 1.0 to Revision 1.01
ꢁ Changed recommended case size of FB1, FB2.
ꢀ
Removed “Confidential” watermark.
Revision 1.03 to Revision 1.05
ꢀ
Revision 1.01 to Revision 1.02
Updated voltage rating from 60 to 80 V for Q4, Q5 in
bill of materials. This is the actual rating of the
specified component. This change only corrects the
typo in the data sheet.
Updated Figure 25 on page 35.
Updated reset settings for R.59.
Added support for TB3 bit to meet South Korea
ringer impedance requirements.
ꢀ
ꢀ
ꢀ
Updated Table 2, “Loop Characteristics,” on page 6.
Updated Table 4, “AC Characteristics,” on page 8
Updated "3.Bill of Materials" on page 19
ꢁ Added optional caller ID circuit components in
ꢀ
ꢀ
ꢀ
footnotes.
ꢁ Removed R14.
Updated Line Voltage/Loop Current Sensing
ꢀ
functional description.
ꢀ
Updated Ordering Guide on page 88.
ꢁ Removed product selection and product identification
sections.
1 2
ꢀ
ꢀ
Updated "9.Ordering Guide , " on page 88.
Updated "11.Package Outline: 16-Pin SOIC" on
page 90.
ꢀ
Updated Table 26, “Package Diagram Dimensions,”
on page 90.
Revision 1.02 to Revision 1.03
ꢀ
Updated Table 4 on page 8.
Updated Table 6 on page 10 to add MCLK jitter
tolerance.
ꢀ
ꢀ
ꢀ
ꢀ
Added Table 10 on page 14.
Updated Table 13 on page 20.
Updated Table 15 on page 23.
ꢁ Changed recommended country settings for Australia,
Austria, Bahrain, Bulgaria, China, Croatia, Cyprus,
Czech Republic, Egypt, Germany, Hungary, Israel,
India, Japan, Jordan, Kazakhstan, Latvia, Lebanon,
Malyasia, Malta, Morocco, Nigeria, Oman, Pakistan,
Philippines, Poland, Romania, Russia, Slovakia,
Slovenia, South Africa, South Korea, Syria, Taiwan,
Thailand.
ꢀ
Updated Table 18 on page 28 (changed act for ACIM
= 1010).
ꢀ
ꢀ
ꢀ
ꢀ
Added Figure 6 on page 14.
Updated "5.25.Clock Generation" on page 36.
Updated Table 23, “Register Summary,” on page 48.
Updated Table 24, “Si3056 Pin Descriptions,” on
page 84.
ꢀ
ꢀ
Updated Figure 19 on page 26.
Updated "5.6.Transmit/Receive Full Scale Level
(Si3019 Line-Side Only)" on page 25 of Functional
description to include new enhanced full scale mode.
The following bits have been added, but will only be
supported with Si3018/19/10 Revision E or later line-
side devices.
ꢀ
ꢁ Added FULL2 bit on p. 73.
ꢁ Added RG1 and GCE bits on p. 89.
Updated Table 24 on page 84.
Updated "9.Ordering Guide , " on page 88.
Update “12.Product Identification”.
ꢀ
1 2
ꢀ
ꢀ
92
Rev. 1.05
SILICON [ SILICON ]
