SC9638EP 参数 Datasheet PDF下载

SC9638EP

4. Mode Switch

4.1 AUTO/BUZZ: Select the alarm clock mode and the current state will not change when power on normally,

it is active in alarm power on.

4.2 CD/RADIO（FM, AM）: Switch to CD, radio (FM, AM) mode when power on;

4.3 In boot-strap mode, when press the key DISPLAY, switch to the time and current state display. If there is

no operation when in current state display within 5 seconds, return to the time display.

5. CD mode

5.1 CD Key Functions

1） STOP

This key will stop the CD play.

2） PLAY/PAUSE

When CD stops, it will play if press this key, and display the CD track;

When CD plays, it will pause if press this key, and the display flashes.

3） NEXT/FF

Short press less than 1 second: next track

Skip to next track. If the current track is the last one, then skip to the first track to play.

Long press more than 1 second: fast forward

Fast forward till the key is released, and if fast forward to the end, then play the first track.

4） PREV/FW

Short press less than 1 second: last track

When the time of current track is less than 1s, skip to the previous track. If the current track is the first

one, then skip to the last one.

When the time of current track is more than 1s, skip to the head of the current track.

Long press more than 1 second: fast backward

Fast backward till release this key, if come to the first one, then play normally.

5） RDM

Switch to random play state. When this function is open, display “RDM”.

6） PROG/RPT

When CD is in stop state, enter the program state, and the “PROG” flashes;

Press REW/FF to select the track, and PROG stores the track, the program number adds by 1, and it

can store 20 tracks at most. If no operation in 8 seconds, then exit the program state, but the tracks are

saved; After completing the program, press PLAY to enter the program play state, and the “PROG” lights;

Press STOP to clear the program tracks, and then exit the program state;

When CD is in play state, enter the RPT function;

When switch to single track or replay the whole disk, press RPT to replay the current track, and “RPT”

flashes; then press RPT again to replay the whole disk, and “RPT” lights.

HANGZHOU SILAN MICROELECTRONICS CO.,LTD

Http: www.silan.com.cn

REV:1.0

2008.03.24

Page 7 of 13