SiI5744 Features
Serial ATA Host Interface Features
Electrical Specifications
eSATA-Based
Capacity
Expansion
• Serial ATA Gen2m compliance
• GPIO pins: 9 GPI, 6 GPO
• 3.3V IO Supply, 1.8V Core Supply
• 1.02 watts (typical)
• eSATA and 2-meter cable support
• 3 Gbps (auto-negotiates to 1.5 Gbps)
With eSATA-based Capacity
Expansion, the capacity of a
SiI5744 enabled appliance can
be easily expanded either by
adding additional drives directly
to the chip, or by adding addi-
• Compatible with PM aware and non-PM
aware hosts
Environmental
• Allows multiple drives to be accessed by non-
PM aware drive hosts
• Operating temperature: 0ºC to 70ºC
• Operating relative humidity: 5% to 80%
• Non-operating relative humidity: 5% to 95%
• Supports NCQ
USB Host Interface Features
Physical Specifications
tional
SteelVine
enabled
devices in a cascaded topol-
ogy. These additional drives or
• Complies with USB 2.0 specification
• 480 Mb/s (can auto-negotiate to 12 Mb/s)
• Compatible with OHCI / UHCI / EHCI hosts
• Supports up to four LUNs
• 88-pin QFN, 10mm x 10mm
devices
will
dynamically
Additional SteelVine features
appear (in BIG, SAFE33 or
SAFE50) to the host system
as increased storage capac-
ity in the existing SteelVine
volume.
• No driver, BIOS or software required
• User API interface through I2C
• No drive reformatting on RAID change
• Email Notification
• Supports Mass Storage Class
Device Interface Features
• Serial ATA Gen2m compliance
• eSATA and 2-meter cable support
• 3 Gbps (auto-negotiates to 1.5 Gbps)
• Independent 8KB FIFO / Port
• Power management capabilities
• Supports hot plug
• Optional XML API
• RAID 1 drive racing
• Optional SteelVine Manager GUI
• Mandatory SMART commands available
• SAFE later
• Supports ATAPI & asynchronous notification
Capacity Expansion Diagram
Block Diagram
Silicon Image, Inc.
1060 E. Arques Avenue
Sunnyvale, CA 94085
T 408.616.4000
F 408.830.9530
www.siliconimage.com
© 2006 Silicon Image, Inc. All rights reserved. Silicon Image, the Silicon Image logo, SteelVine, the SteelVine logo, SiI and SiI5744 are trademarks or registered trademarks of Silicon Image, Inc. in the United States
and other countries. Other trademarks are property of their respective holders. Product specifications are subject to change without notice.
Part Number: SiI5744
SiI PB-60 rev1 8/06