PMR SERIES
□
RELIABILITU PERFORMANCE
Test Item
Condition of Test
Requirements
Measurement
Method
Refer to
JIS C 5202 7.4
Refer to
JIS C 5202 5.5
Refer to
JIS C 5202 7.1
Refer to
JIS C 5202 7.11
Thermal Shock
-60°C to + 150°C, 1000 cycles,
15 minutes at each extreme
± 0.5%
Short Time Overload
5 x rated power for 5 seconds
± 0.5%
Low Temperature Storage
Kept - 60°C for 24 hours
± 0.5%
High Temperature Exposure
Kept + 170°C for 1000 hours
± 0.5%
Bias Humidity
+ 85°C, 85% RH, 10% Bias,
1000 hours
± 0.5%
-
Mechanical Shock
100G’s for 6 milliseconds, 5 pulses
Frequency varied 10 to 2000Hz
± 0.5%
Refer to
JIS C 5202 6.2
Vibration
in one minute,
3 directions, 12 hours
± 0.5%
-
Load Life
1000 hours @ rated power, + 70°C,
1.5 hours “ON”, 0.5 hours “OFF”
+ 260°C Solder,10 - 12 second dwell,
25mm/second emergence
MIL-STD-202, Method 106,
0% power, 7a and 7b not required
± 1.0%
Refer to
JIS C 5202 7.10
Refer to
JIS C 5202 6.4
Resistance to Solder Heat
± 0.5%
Moisture Resistance
± 0.5%
-
http:// www.sirectsemi.com
SIRECT [ Sirectifier Global Corp. ]
