ST7787 参数 Datasheet PDF下载

ST

Sitronix

1. Introduction

2. Features

ST7787

262K Color Single-Chip TFT Controller/Driver

The ST7787 is a single-chip controller/driver for 262K-color, graphic type TFT-LCD. It consists of 720 source line and

320 gate line driving circuits. This chip is capable of connecting directly to an external microprocessor, and accepts Serial

Peripheral Interface (SPI), 8-bits/9-bits/16-bits/18-bits parallel interface. Display data can be stored in the on-chip display

data RAM of 240x320x18 bits. It can perform display data RAM read/write operation with no external operation clock to

minimize power consumption. In addition, because of the integrated power supply circuits necessary to drive liquid crystal,

it is possible to make a display system with the fewest components.

Single chip TFT-LCD controller/driver with display data RAM

Display resolution: 240(H) x RGB x 320(V)

Display data RAM (frame memory): 240 x 320 x 18-bits = 1,382,400 bits

Operation Frequency: DC~30MHz (30MHz for 6 bits, 10MHz for 18 bits)

Output:

- 240ch source outputs (240RGB)

- 320ch gate outputs

- Common electrode output

Display mode (color mode)

- Full color mode (idle mode off): 262K-colors

- Reduce color mode (idle mode on): 8-colors (1-bit for individual R, G, B color depth)

Display resolution option

- 240 x 320 Display with 240 x 18-bits x 320 display RAM

Supported LC type option

- MVA LC type (When LCM[1]=0,LCM[0]=0 )

- Transflective LC type (When LCM[1]=0,LCM[0]=1 )

- Transmissive LC type (When LCM[1]=1,LCM[0]=0 )

Supported data format on display host interface

- 12-bits/pixel: RGB= (444) using the 1382k bits frame memory and LUT

- 16-bits/pixel: RGB= (565) using the 1382k bits frame memory and LUT

- 18-bits/pixel: RGB= (666) using the 1382k bits frame memory

Supported MCU Interface

- 3-line serial interface

- 8-bits, 9-bits, 16-bits, 18-bits interface with 8080-series MCU

- 8-bits, 9-bits, 16-bits, 18-bits interface with 6800-series MCU

- 6-bits, 16-bits, 18-bits RGB interface with graphic controller

Display features

- Area scrolling

- Partial display mode

- Software programmable color depth mode

Build-in circuit

- DC/DC converter

- Adjustable VCOM generation

- Non-volatile (NV) memory to store initial register setting

- Oscillator for display clock generation

- Timing controller

-

4 preset gamma curve for

γ=1.0/1.8/2.2/2.5

(supporting Transflective) and 1 preset gamma curve for

γ=2.2

(supporting MVA, Ttransmissive type LC)

- Factory default value (contrast, module ID, module version, etc) are stored in NV memory

- Line inversion, frame inversion

NV Memory

- 8-bits for ID1

- 7-bits for ID2

- 8-bits for ID3

- 8-bits for VCOM adjustment

Supply voltage range

- Analog supply voltage range (VDD to AGND): 2.45V – 3.3V

- I/O supply voltage range (VDDI to DGND): 1.65V – 3.3V

Sitronix Technology Corp. reserves the right to change the contents in this document without prior notice.

1