DATA SHEET
ATN3590 Series: Fixed Attenuators
Applications
Level adjustment in radios, radars, EW/ECM equipment, and
test instruments
Features
Fixed value, absorptive devices
Available attenuation values range from 0 to 10 dB (in 1 dB
steps), and 12, 15, 20, and 30 dB
Suitable for use to 40 GHz or higher
Excellent return loss: 30 dB, typical
Enhanced power handling: 2 W
Back Side
Out
Back Side
Skyworks offers lead (Pb)-free, RoHS (Restriction of
Hazardous Substances) compliant packaging.
In
Schematic
Figure 1. Typical Attenuator Die and Circuit
Description
The ATN3590 family of fixed resistive attenuators are integrated
circuits comprising thin film resistors and through-die vias that
provide excellent attenuation flatness from low frequency to
40 GHz or higher. These attenuators are available from 0 to 30 dB
(see Table 2).
The ATN3590 attenuator family is optimized for surface mounting
on co-planar waveguide or microstrip printed circuit boards. Bond
wires or ribbons are used to connect the input and output ports of
the attenuators to the external circuit transmission lines.
Connection to ground is accomplished by through-die vias to the
die backside metallization.
The dice are attached using eutectic solder or conductive epoxy
and can operate over a temperature range of –65 C to 150 C.
The absolute maximum ratings for the ATN3590 attenuators are
provided in Table 1 and the electrical specifications are shown in
Table 2. Typical performance characteristics are illustrated in
Figures 2 through 8.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200842B • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • December 2, 2009
1
SKYWORKS [ SKYWORKS SOLUTIONS INC. ]
