DATA SHEET • SKY13335-381LF SPDT SWITCH
RFC
OUT2
OUT1
S1527
VCTL1
VCTL2
Figure 2. SKY13335-381LF Block Diagram
Table 1. SKY13335-381LF Signal Descriptions
Pin #
Name
Description
RF port. Must be DC blocked.
Ground
Pin #
Name
Description
1
2
3
OUT1
GND
4
5
6
VCTL1
RFC
DC control voltage.
RF port. Must be DC blocked.
DC control voltage.
OUT2
RF port. Must be DC blocked.
VCTL2
Note: Exposed paddle must be connected to ground.
Table 2. SKY13335-381LF Absolute Maximum Ratings
Parameter
Symbol
Minimum
Typical
Maximum
Units
RF input power:
PIN
f >500 MHz @ 5 V
f >500 MHz @ 3 V
+32
+31
dBm
dBm
Operating temperature
Storage temperature
TOP
–40
–65
+85
°C
°C
TSTG
+150
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
Table 3. SKY13335-381LF Recommended Operating Conditions
Parameter
Symbol
Minimum
Typical
Maximum
Units
Frequency
f
0.1
6.0
GHz
Control voltage:
Low
High
VCTL_L
VCTL_H
0
1.8
0.2
5.0
V
V
Operating temperature
TOP
+25
qC
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
October 1, 2009 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 201093C
2