欢迎访问ic37.com |
会员登录 免费注册
发布采购

SKY65015-70LF 参数 Datasheet PDF下载

SKY65015-70LF图片预览
型号: SKY65015-70LF
PDF下载: 下载PDF文件 查看货源
内容描述: 的InGaP放大器级联LF- 6 GHz的 [InGaP Cascadable Amplifier LF-6 GHz]
分类和应用: 放大器
文件页数/大小: 5 页 / 295 K
品牌: SKYWORKS [ SKYWORKS SOLUTIONS INC. ]
 浏览型号SKY65015-70LF的Datasheet PDF文件第1页浏览型号SKY65015-70LF的Datasheet PDF文件第2页浏览型号SKY65015-70LF的Datasheet PDF文件第4页浏览型号SKY65015-70LF的Datasheet PDF文件第5页  
DATA SHEET • SKY65015-70LF
Absolute Maximum Ratings
Characteristic
RF input power
Supply voltage
Supply current
Power dissipation @ T = 25 °C
Operating temperature
Storage temperature
Value
15 dBm
5V
120 mA
500 mW
-40 °C to +85 °C
-65 °C to +125 °C
Pin Out (Top View)
4
1
2
3
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
Pin Descriptions
Pin Number
2, 4
Pin Name
GND
Description
Equipotential point – Internal circuit com-
mon, which must be connected to the PCB
ground or common via the lowest possible
impedance. Pin 4 must be connected via a
low thermal resistance path to a good
heatsink.
RF input – RF input with 50
Ω
nominal
input impedance. An internally generated
DC voltage is present at this pin, so an
external DC block should be used to
connect this pin to the external circuit.
RF output – DC supply voltage input and
RF output with 50
Ω
nominal output
impedance. The nominal voltage required
at this pin is listed in the Electrical
Specifications Table. Supply current is
determined by an external resistor
connected between the DC power supply
and this pin.
CAUTION:
Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
1
Input
SOT-89
0.381 ± 0.025
R0.10
1.50
4.09 ± 0.10
Sharp
3
Output
0.46
R0.10
1.50 ± 0.10
Side
View
Half Etching
Depth 0.100
End View
3
2
1
Bottom View
All measurements are in millimeters
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200356 Rev. D • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • February 21, 2007
3