DATA SHEET
SMP1307 Series: Very Low Distortion Attenuator
Plastic Packaged PIN Diodes
Features
Low distortion design
●
Frequency range from HF to > 2 GHz
●
Designed for CATV AGC applications
●
Designed for high volume wireless applications
●
Description
The SMP1307 series of plastic packaged, surface mountable, low
capacitance (0.3 pF) silicon PIN diodes are designed for use in
attenuator applications from 5 MHz to beyond 2 GHz. The thick
175
µm
I region of these PIN diodes makes them very attractive
for use in very low distortion PI and TEE attenuators commonly
used in TV distribution applications. The 1.5 µs typical carrier life-
time of these diodes results in resistance of 100
Ω
maximum at
1 mA and 10
Ω
maximum at 10 mA. Available in a selection
of plastic packages, as a single diode in the small footprint
SOD-323, and in a variety of configurations in the SOT-23. Also
available in a SOT-5 (SMP1307-027) package as a four diode
array designed for insertion in the commonly used 4 diode PI
attenuator circuit.
Absolute Maximum Ratings
Characteristic
Reverse voltage (V
R
)
Power dissipation @ 25 °C lead
temperature (P
D
)
Storage temperature (T
ST
)
Operating temperature (T
OP
)
ESD human body model
Value
200 V
250 mW
-65 °C to +150 °C
-65 °C to +150 °C
Class 1C
Performance is guaranteed only under the conditions listed in the specifications table and is
not guaranteed under the full range(s) described by the Absolute Maximum specifications.
Exceeding any of the absolute maximum/minimum specifications may result in permanent
damage to the device and will void the warranty.
NEW
Skyworks offers lead (Pb)-free “environmentally
friendly” packaging that is RoHS compliant
(European Parliament for the Restriction of
Hazardous Substances).
CAUTION:
Although this device is designed to be as robust as
possible, Electrostatic Discharge (ESD) can damage
this device. This device must be protected at all times
from ESD. Static charges may easily produce poten-
tials of several kilovolts on the human body or
equipment, which can discharge without detection.
Industry-standard ESD precautions must be employed
at all times.
Single
SOT-23
SMP1307-001
Marking: PJ1
SMP1307-001LF
Marking: RJ1
L
S
= 1.5 nH
Common
Cathode
SOT-23
SMP1307-004
Marking: PJ3
SMP1307-004LF
Marking: RJ3
L
S
= 1.5 nH
Series Pair
SOT-23
SMP1307-005
Marking: PJ2
SMP1307-005LF
Marking: RJ2
L
S
= 1.5 nH
Single
SOD-323
SMP1307-011
Marking: PJ
SMP1307-011LF
Marking: RJ
L
S
= 1.5 nH
PI
SOT-5
SMP1307-027
Marking: PJM
LF denotes lead (Pb)-free packaging option as an alternative to our standard tin/lead
(Sn/Pb) packaging.
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • sales@skyworksinc.com • www.skyworksinc.com
200045 Rev. A • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice. • October 26, 2004
1