GNT200
Front End Series 200W AC/DC
Universal Input Power Supply
•Wide
Range Input 100-240 VAC with PFC
•Inhibit,
Enable, Power Signals and Remote Sense Standard
•Power
Density 10-13W/in³
•Compact
(3.0” x 5.0” x 1.25”)
•High
Efficiency: 90% Typical
•Main
Output and Two Auxiliary Outputs
•Conducted
EMI meets Class B
•Approved
to CSA/EN/IEC/UL 60950-1, 2
•Also
Available in Class II (G2T200)
•CB
Report Available (for IEC60601-1 standard)
nd
2 Year Warranty
Edition for ITE
•Approved
to EN/IEC/UL60601-1 and CSA 22.2 No. 601 for Medical
Specifications
AC Input
Input Current
Inrush Current
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
100-240VAC, 50/60 Hz, single phase
80-270VAC, 45-65 Hz max
120VAC: 3A. 230VAC: 1.5A
Limited by internal thermistor. The inrush at 240Vac,
averaged over the first AC half-cycle under cold start
conditions will not exceed 38A.
F1 and F2, 4A/250V
0.98 typical, 0.96 minimum
100µA at 120VAC NC, 400µA at 264VAC, SFC
200W continuous with 200lfm airflow
See chart for convection ratings
240W for 1 minute, 10% duty cycle
See chart
Adjustable potentiometer, capable of
±5% change from the nominal setting
Not required
See chart
Turn On Time
Hold-up Time
Thermal Considerations
500 ms max
See chart
Keeping the following components below
these temps indicates sufficient cooling:
Q1: 90°C max., T4: 110°C max
3.5% max
Cycling type, 250W nominal limit
See chart
1% pk-pk max., 20MHz BW,
0.1µF and 10
µF
caps on probe
CSA/EN/IEC/UL 60950-1, 2
nd
Edition
EN/IEC/UL 60601-1, CSA22.2 No. 601-1
Output: 195kHz ±12kHz, PFC: 130kHz
300K hours per Telcordia
Automatic
90% typical at 230VAC, 87% typical at 120VAC
0 to 70°C (see chart)
-40 to +85°C
5% to 95%, non-condensing
MIL-STD-810E, 516.4 part IV
Input Fuses
Power Factor
Leakage Current
Output Power
Over/Undershoot
Overload Protection
Overvoltage Protection
Ripple and Noise
ITE Safety Standards
Medical Safety Standards
Switching Frequency
MTBF
Overtemperature Protection
Efficiency
Peak Output Power
Output Voltage
Voltage Adjustability
Minimum Load
Total Regulation
Transient Response
500µs to 1%, 50% load step, i/ t < 0.2A/µs
Maximum voltage deviation is 3.5%
Temperature Coefficient
0.03% per
°C
typical on all units
Operating Altitude
-500
to 10,000 ft
Non-operating Altitude
Vibration
-500 to 40,000 ft
5 Hz – 500 Hz, 5 grms
Operating Temperature
Storage Temperature
Relative Humidity
Shock
Model Number Key
GNT 2 XX X G
RoHS Com pliant
Enclosure Options: Blank - no enclosure; F = Fan Cover w ith "U" channel; L = L
bracket, no cover; T = Slotted cover w ith U channel; U = U channel, no cover.
Output Voltage: (See m odels chart below )
Output Pow er (Watts): "2" = 200W
Product Fam ily (GNT = Class I input, G2T = Class II input)
______________________________________________________________________________________________________________________________
1 of 3
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
SLPOWER [ SL Power Electronics ]
