MENT1150
Universal Input 150 Watt Series
Medical / ITE Switch-Mode Power Supply
•
100-240VAC Universal Input
•
Meets EISA2007, CEC Efficiency Level V,
3
Year Warranty
EU (EC) No 278/2009 Phase II
•
Desktop Style with LED Power-On indicator
•
12V to 48V Single Output Models, up to 150W
•
Modified and Custom Designs Available
•
Regulated Output with Low Ripple
•
Impact-Resistant Polycarbonate Enclosure
•
No Load Power Consumption <0.5W
•
Meets UL/EN/IEC60601-1 & 60950-1 2
nd
edition
RoHS
Specifications
AC Input
Input Current
Inrush Current
Input Fuse
Efficiency
Output Voltage
Output Power
Ripple and Noise
Line/Load Regulation
Transient Response
Minimum Load
Case Material
Case Dimensions
Altitude
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
100-240Vac, +/-10%, 47-63 Hz, 1∅
115VAC: 3A, 230VAC: 1.5A
75A peak @ 264Vac, cold start
4.0A, 250V Internal Primary Current Fuse provided
Meets International Efficiency Level V
See chart
See chart
1% pk-pk max., 20MHz BW
Including Cord: Line: +/- 1%, Load: +/-5%
Maximum deviation of 5% with 25% to
75% load change and 0.2A/uSec slew rate
Not required
Black 94V0 Polycarbonate
see mechanical drawing
MTBF
Hold-up Time
Overvoltage Protection
Overload Protection
Short Circuit Protection
Overtemperature Protection
Input Harmonics
Safety Standards
Isolation
Operating Temperature
Temperature Coefficient
Storage Temperature
Relative Humidity
Switching Frequency
> 100K hours (calculated, 25 C at full load)
20 ms min. @ 115VAC
130% of nominal output voltage
120-180% of full rated load, auto-recovery
Provided with no damage to supply
Latched, requires input recycling
Meets IEC61000-3-2
IEC/EN/UL60601-1 & EN/IEC/UL60950-1 2
nd
edition
40kHz to130kHz , variable
Input-Output: 4000VAC,
Input-GND: 1500VAC, Output-GND: 700VDC
0° to 40°C Full load Derate linearly to
40% of full rated load at 70°C
0.04% per
°C,
maximum
-40°C to +85°C
5% to 95%, non-condensing
-500
to 10,000 ft, operating; -500 to 40,000 ft, non-operating
EMI/EMC Compliance
Conducted Emissions
Radiated Emissions
Voltage Fluctuations
Static Discharge Immunity
Radiated RF Immunity
EFT/Burst Immunity
Line Surge Immunity
Conducted RF Immunity
Power Frequency Magnetic Field Immunity
Voltage Dip Immunity
Line Frequency Harmonics
FCC Part 15 Subpart B, Class B, EN55011 Class B, EN55024
FCC Part 15 Subpart B, Class B, EN55011 Class B, EN55024
EN61000-3-3 Complies (dmax<6%)
EN61000-4-2, 6kV Contact Discharge, 8kV air discharge. Criteria A
EN61000-4-3, 3V/m. Criteria A
EN61000-4-4, 2kV/5kHz. Criteria A
EN61000-4-5, 1kV differential, 2kV common-mode, Criteria A
EN61000-4-6, 3Vrms, Criteria A
EN61000-4-8, 3A/m, Criteria A
EN61000-4-11, 0 % Vnominal, 0.5 cycle; 40% Vnominal, 5 cycles;
70% Vnominal, 25 cycles: Criteria A
EN61000-3-2, Class A, B, C & D
______________________________________________________________________________________________________________________________
1 of 2
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
SLPOWER [ SL Power Electronics ]
