MENT1220
Universal 220 Watt Series
Medical Switch-Mode Power Supply
•
Universal Input 100Vac – 240Vac
•
12V to 48V Single Output Models up to 220W
•
Desktop Style/Non-vented case - No internal fan!
•
Ribbed Case Surface to improve cooling
•
Energy Star 2.0, Level V
•
Certified to Medical (UL/IEC/EN60601-1) and
3Year Warranty
ITE (UL/IEC/EN60950-1) Standards
•
IPX1 Rated Enclosure
•
Class I and Class II input versions available.
•
Modified and Custom Designs
Specifications
AC Input
Input Current
Inrush Current
Input Fuses
PFC, Harmonics
Earth Leakage Current
Efficiency
No Load Power
Transient Response
Output Voltage
Line Regulation:
Load Regulation
Minimum Load
Ripple and Noise
Turn-on Time
Output Connections
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
100-240VAC, +/-10%, 47-63 Hz single phase
115VAC: 4A max, 230VAC: 1.5A max
75A max. @ 264VAC, Cold Start
Internal 6.3A Primary Current Fuses are provided
IEC61000-3-2
<350µA typical @264VAC, 50Hz
88% typical
<0.5W
5ms max. for 50% load step
Max deviation is 5%
See chart
+/-0.5% max
+/-3% max
Not required
1% pk-pk max., 20MHz BW, differential mode
3 sec. maximum @ 115VAC
See chart and outline drawing
MTBF
Hold-up Time
Overvoltage Protection
Overload Protection
Short Circuit Protection
Switching Frequency
Medical Safety Standards
ITE Safety Standards
Isolation:
Operating Temp.
Storage Temperature
Relative Humidity
Altitude
Case Material
Case Dimensions
Weight
>100,000 hours (calculated)
21 ms min. @ 100VAC
130% of nominal output voltage
110-150% of full rated load, auto-recovery
Hiccup Mode, auto-recovery
50-120kHz, variable
EN/IEC/UL60601-1
EN/IEC/UL60950-1
Input-Output: 4KVac, Input-GND: 1.5KVac
Output-GND: 700Vdc
0° - 70°C, derate above 40°C to
60% of full rated load at 70°C
-20 to +85°C
5% to 95%, non-condensing
0 to 10,000 ft
Black 94V-0 rated Polycarbonate
Desktop Style: 8.4” x 4.25” x 1.85”
1200g
______________________________________________________________________________________________________________________________
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
1 of 3