MINT1065
65W Single Output Series
Medical & ITE – Universal Input Power Supply
•
65W Convection Cooled AC-DC Power Supply
•
Universal Input 90-264 VAC
•
Less than 0.5W No Load Power Dissipation
•
Rugged EMC Compliant Design
•
2” x 4” x 1.2” Package
•
Approved to EN/IEC/UL60601-1, 2
•
Approved to EN/IEC/UL60950-1, 2
nd
3 Year Warranty
Edition
Edition
nd
•
Meets Efficiency Level IV Efficiency
•
Compliant (LVD, RoHS)
•
Optional Chassis/Cover
Specifications
All Specifications are typical at nominal input, full load at 25
C unless otherwise stated.
AC Input
100-240VAC +/- 10%, 47-63 Hz single phase.
Input Current
115VAC: 0.7A, 230VAC: 1.5A.
Inrush Current
The inrush at 264VAC, at a cold start, will not exceed 40A.
Input Fuses
F1, F2: 2.5A, 250VAC fuses provided on all models.
Earth Leakage Current
<300μA @ 264Vac, 60Hz, normal; <500μA SFC.
Efficiency
Up to 90% typical.
Output Power
65W continuous.
Ripple and Noise
1% pk-pk max., 20MHz BW, differential mode. Measured with noise
probe directly across output terminals.
Output Voltage
See chart.
Voltage Adjustability
Voltage pre-set by fixed resistance.
Minimum Load
Not required.
Total Regulation
+/- 2%. See chart.
Transient Response
500μs max., 50% load step, typical.
Turn On Time
Less than 1 second under all rated load conditions.
Hold-up Time
<17 ms at 65W, nominal input (120VAC).
Overvoltage Protection
Built-in
Overload Protection
Hiccup Mode
Short Circuit Protection
Hiccup Mode
Switching Frequency
Variable 50-75kHz typical.
Medical Safety Standards
EN/IEC/UL 60601-1, 2
nd
Edition, EN/IEC/UL60950-1, 2
nd
Edition
Isolation
Input-Output: 4000VAC, Input-Ground: 1800VAC, Output-Ground:
500VAC
Operating Temperature
0 to 70C (derate from full rated power above 40C).
Cooling
Convection
Output Power Derating
See derating chart
Storage Temperature
-40 to +85C.
Relative Humidity
5% to 95%, non-condensing
______________________________________________________________________________________________________________________________
1 of 3
SL Power Electronics Corp
6050 King Drive Ventura, CA 93003
Phone 805.486.4565
Fax 858.712.2040
Email: info@slpower.com
www.slpower.com