MINT1110A
110W Single Output Series
Medical – Universal Input Power Supply
•
110W Convection Cooled AC-DC Power Supply
•
Universal Input 90-264 VAC
•
Less than 1.27” Height
•
Rugged EMC Compliant Design
•
3” x 5” Package
•
Approved to EN/IEC/UL60601-1 for Medical
•
2 Year Warranty
Compliant (LVD, RoHS)
Specifications
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
AC Input
100-240VAC +/- 10%, 47-63 Hz single phase.
Input Current
115VAC: 1.4A.
Inrush Current
The inrush at 264VAC, at a cold start, will not exceed 40A.
Input Fuses
F1, F2: 2.5A, 250VAC fuses provided on all models.
Power Factor
Complies with EN61000-3-2.
Efficiency
87% typical.
Output Power
90 - 110W continuous.
Ripple and Noise
1% pk-pk max., 20MHz BW, differential mode. Measured with noise
probe directly across output terminals.
Output Voltage
See chart.
Minimum Load
Not required.
Total Regulation
See chart.
Transient Response
500µs max., 50% load step, typical.
Turn On Time
Less than 2 seconds under all rated load conditions.
Hold-up Time
16 ms at 110W, nominal input (120VAC).
Overvoltage Protection
See chart for levels, latching type
Overload Protection
Hiccup Mode
Short Circuit Protection
Hiccup Mode
Overtemperature Protection
Provided on all models.
Medical Safety Standards
EN/IEC/UL 60601-1, CSA22.2, No. 601.1
Isolation
Input-Output: 4000VAC, Input-Ground: 1500VAC, Output-Ground:
500VDC
Earth Leakage Current
<130µA at 264Vac, 60Hz.
Operating Temperature
0° to 70°C (derate from full rated power above 40°C)
Output Power Derating
Derate Output Power by 2.5% per
°C
above 40°C, up to 70°C max.
Storage Temperature
-40 to +85°C.
Relative Humidity
5% to 95%, non-condensing
1 of 3
______________________________________________________________________________________________________________________________
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
SLPOWER [ SL Power Electronics ]
