PENT1080
80 Watt Power over Ethernet Injectors
Compliant/Non-Compliant, 10/100 and Gigabit Injectors
•
10/100 and 10/100/1000 (MbPS) Data Rate models
•
Self-Contained Injector
•
100-240VAC Universal Input
•
Desktop Style/Non-vented case
•
IEEE802.3af Detection and Disconnection Compliant,
2 Year Warranty
and Non-Compliant models
•
Power ON LED
•
Overload Shutdown and Short Circuit Protection
•
Regulated Output with Low Ripple
Specifications
AC Input
100-240VAC, -10%,+6%, 47-63 Hz single phase.
Input Current
115VAC: 1.4A, 230VAC: 0.7A.
Inrush Current
Inrush limiting provided.
Input Fuses
Internal Primary Current Fuse is provided.
Earth Leakage Current
Class II: <250µA, Class I: <750µA.
Efficiency
80% typical.
Output Power
80W continuous.
Ripple and Noise
1% pk-pk max., 20MHz BW, differential mode.
Output Voltage
See chart.
Line & Load Voltage Regulation
Excluding Cord: +/- 1%.
Minimum Load
Not required.
Transient Response
500µs max., 50% load step, typical.
Case Dimensions:
Desktop Style: 8.34” x 2.24” x 1.48”.
Output Connections:
Dual RJ-45 jacks built-in.
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
MTBF
>100,000 hours (calculated)
Hold-up Time
16.7 ms min. @ 115VAC, 20mS min. @ 230VAC
Overvoltage Protection
Built-in, latch off
Overload Protection
Foldback Mode
Short Circuit Protection
Hiccup Mode
Topology
Flyback Switching Type
Safety Standards
EN/IEC/UL 60950-1, CSA22.2, No. 950, 2
nd
Edition
Isolation
Input-Output: 3000VAC
Operating Temperature
0° to 40°C, no derating
Storage Temperature
-20 to +85°C.
Relative Humidity
5% to 95%, non-condensing
Altitude
0 to 10,000 ft.
Case Material:
Black 94V-0 rated Polycarbonate
Power ON LED:
Provided on all models
______________________________________________________________________________________________________________________________
1 of 2
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com