PW172KB
Universal 15 – 19 Watt Series
ITE Switch-Mode Power Supply
•
100-240VAC Universal Input
•
Desktop and Wall-Plug Style with either fixed blades, or
3 Year Warranty
Interchangeable Blades* ( Kit sold separately)
•
5V to 48V Single Output Models, up to 19W
•
Modified and Custom Designs Available
•
Regulated Output with Low Ripple
•
Impact-Resistant Polycarbonate Enclosure
•
No load Power Consumption < 0.5W
•
Meets EISA Requirements (see next page for details).
•
Meets Energy Star Level IV
Specifications
All Specifications are typical at nominal input, full load at 25
°
C unless otherwise stated.
MTBF
>100,000 hours (calculated)
Hold-up Time
18 ms min. @ 115VAC
Overvoltage Protection
Built-in
Overload Protection
Hiccup Mode
Short Circuit Protection
Hiccup Mode
Topology
Switching – Fixed Frequency Flyback
Approvals and Safety Standards
EN/IEC/CSA/UL60950-1, EMC: EN55022/55024/61000
Dielectric Withstand
Input-Output: 3000VAC, Input-GND: 1500VAC, Output-GND: 500VDC
Operating Temperature
0° to 40°C, no derating
Storage Temperature
-30 to +85°C.
Relative Humidity
5% to 95%, non-condensing
Altitude
0 to 10,000 ft.
Output Connections:
Cable: 18AWG, 1800mm (5V & 6V models: 1500mm), 2 conductor.
Connector: 2.5mm barrel type (Ault #3) connector, center contact (+).
Other connector options are available.
AC Input
100-240VAC, -/-10% (class I), +6%, -10% (class II), 47-63 Hz, 1∅.
Input Current
90VAC: 0.5A
Inrush Current
Inrush limiting provided.
Input Fuses
Internal Primary Current Fuse is provided.
Efficiency
Meet EISA Requirements – see page 2
Output Voltage
See chart.
Output Power
See chart
Ripple and Noise
1% pk-pk max., 20MHz BW
Line & Load Voltage Regulation
Excluding Cord: Line: +/- 1%, Load: +/-5%.
Transient Response
500µs max., 50% load step, typical
Minimum Load
Not required.
Case Material:
Black 94V0 Polycarbonate
Case Dimensions:
See outline drawing.
Model Number Key
PW172 K B 12 03 F 01
Modification Designator. "01" is standared part, "02" and higher denotes a modified model.
Input Receptacle. See Below for options. "F" receptacle (IEC320, C14 type, grounded) noted above.
Output Connector. "03" connector is standard. Other output connectors available. Contact the factory for more details
Output Voltage
Design Revision Changes
Manufacturing Location
Product Family
______________________________________________________________________________________________________________________________
SL Power Electronics Corp
•
6050 King Drive Ventura, CA 93003
•
Phone 805.486.4565
•
Fax 858.712.2040
•
Email: info@slpower.com
•
www.slpower.com
1 of 3
SLPOWER [ SL Power Electronics ]
