1°C Triple Temperature Sensor with Resistance Error Correction
Datasheet
Table 1.2 Absolute Maximum Ratings
DESCRIPTION
Supply Voltage V
DD
Voltage on SMDATA and SMCLK
pins
Voltage on any other pin
Operating Temperature Range
Storage Temperature Range
Lead Temperature Range
Package Thermal Characteristics for MSOP-8
Power Dissipation
Thermal Resistance (at 0 air flow)
ESD Rating, All Pins Human Body Model
TBD
135.9
2000
°C/W
V
RATING
-0.3 to 5.0
-0.3 to 5.5
-0.3 to VDD+0.3
0 to 85
-55 to 150
Refer to JEDEC
Spec. J-STD-020
UNIT
V
V
V
°C
°C
Note:
Stresses above those listed could cause damage to the device. This is a stress rating only
and functional operation of the device at any other condition above those indicated in the
operation sections of this specification is not implied. When powering this device from
laboratory or system power supplies, it is important that the Absolute Maximum Ratings not be
exceeded or device failure can result. Some power supplies exhibit voltage spikes on their
outputs when the AC power is switched on or off. In addition, voltage transients on the AC
power line may appear on the DC output. If this possibility exists, it is suggested that a clamp
circuit be used.
Revision 1.2 (02-05-07)
DATASHEET
4
SMSC EMC1023
SMSC [ SMSC CORPORATION ]
