欢迎访问ic37.com |
会员登录 免费注册
发布采购

SN8P1808 参数 Datasheet PDF下载

SN8P1808图片预览
型号: SN8P1808
PDF下载: 下载PDF文件 查看货源
内容描述: 8位微控制器 [8-Bit Micro-Controller]
分类和应用: 微控制器
文件页数/大小: 129 页 / 616 K
品牌: SONIX [ SONIX TECHNOLOGY COMPANY ]
 浏览型号SN8P1808的Datasheet PDF文件第1页浏览型号SN8P1808的Datasheet PDF文件第3页浏览型号SN8P1808的Datasheet PDF文件第4页浏览型号SN8P1808的Datasheet PDF文件第5页浏览型号SN8P1808的Datasheet PDF文件第6页浏览型号SN8P1808的Datasheet PDF文件第7页浏览型号SN8P1808的Datasheet PDF文件第8页浏览型号SN8P1808的Datasheet PDF文件第9页  
SN8P1800
8-bit micro-controller build-in 12-bit ADC + 72 dots LCD driver
AMENDMENT HISTORY
Version
VER 1.90
VER 1.93
Date
Sep. 2002
Feb. 2003
Description
V1.90 first issue
1. Extend chip operating temperature from “0°C ~ +70°C” to “-20°C ~ +70°C”.
2. Change the description of ADD M,A instruction from “M
3. Add ADC grade.
4. Change bit name and initial value of RBANK register.
5. Change “ACC can’t be access by “B0MOV” instruction” to “ACC can’t be access by
“B0MOV” instruction during the instant addressing mode”.
6. Correct the description of STKnH.
7. Correct the bit definition of INTEN register.
8. Change “The low-speed clock frequency is supplied through on-chip RC oscillator
circuit” to “The low-speed clock frequency is supplied through external low clock
oscillator (32.768K) by crystal or RC mode”.
9. Change all “internal low-speed clock” to “external low-speed clock”.
10.
11.
Correct the description of “TC0 CLOCK FREQUENCY OUTPUT” section.
Correct the description of “TC1 CLOCK FREQUENCY OUTPUT” section.
M+A” to “M
A+M”
12. SCKMD = 1 means SIO is in SLAVE mode. SCKMD = 0 means SIO is in MASTER
mode.
13.
14.
15.
16.
17.
18.
19.
20.
VER 1.94
Sep. 2003
Remove “SIO clock and SPI clock are compatible”.
Remove this line: “B0MOV A, P2”. P2 of SN8P1808 is output only.
Note: The clock source of LCD driver is external low clock.
Modify the description ADR register.
Modify ADB’s output data table.
Correct an error of template code: “b0bclr FWDRST”
Add a notice about OSCM register access cycle.
Add slow mode (high clock stop and LVD OFF) operating current.
“b0bset FWDRST”.
1. Correct RAM Bank value.
2. Correct EOC description.
3. Correct watchdog timer overflow time.
4. Correct POP operand.
5. Correct ADCKS table.
6. Modify figure 11-1 (adjust circuit of LCD contrast) and related description.
7. Add new section about checksum calculate must avoid 04H~07H
8. Correct description of Port6 as I/O port in Chapter 10.
9. Add WTCKS bit in OSCM register
10. Add TC0CKS/TC1CKS in TC0M/TC1M
11. Reserved Last 16 word ROM addresses
SONiX TECHNOLOGY CO., LTD
Revision 1.94