CXA2066S
Sub Address
0101
VDET LEVEL (2)
Controls the signal detection (VDET) slice level.
0: Slice level minimum (30mV when RIN = GIN = BIN)
3: Slice level maximum (220mV when RIN = GIN = BIN)
Controls the OSD gain common to the R, G, and B channels. Since
control is performed by multiplying with SUB CONTRAST (upper 6 bits),
white balance and tracking for the video is obtained.
0: Gain minimum (0Vp-p)
63: Gain maximum (5Vp-p)
Controls Pin 6 (COF RGB) output voltage.
0: Output voltage minimum (1V)
255: Output voltage maximum (4V)
Sub Address
0101
OSD GAIN (6)
Sub Address
0110
CUT OFF RGB (8)
Sub Address
0111
SUB CONTRAST R (8) Controls the R channel gain. Control is performed by multiplying with
CONTRAST. Use for adjusting the white balance.
0: Gain minimum (–30dB or less)
255: Gain maximum (+17dB)
SUB CONTRAST G (8) Controls the G channel gain. Control is performed by multiplying with
CONTRAST. Use for adjusting the white balance.
0: Gain minimum (–30dB or less)
255: Gain maximum (+17dB)
SUB CONTRAST B (8) Controls the B channel gain. Control is performed by multiplying with
CONTRAST. Use for adjusting the white balance.
0: Gain minimum (–30dB or less)
255: Gain maximum (+17dB)
VDET OFF (1)
Controls the Pin 16 (VDET) output.
0: VDET output on
1: VDET output off
Controls the sharpness function.
0: Sharpness on
1: Sharpness off
Controls the Pin 30 (CSYNC) output.
0: SYNC output on
1: SYNC output off
Controls the time constant during sharpness.
0: 50ns
1: 100ns
Controls the sharpness gain.
0: Gain minimum (–30dB or less)
15: Gain maximum (+7dB)
–8–
Sub Address
1000
Sub Address
1001
Sub Address
1010
Sub Address
1010
SHP OFF (1)
Sub Address
1010
SYNC OFF (1)
Sub Address
1010
T SW (1)
Sub Address
1010
SHP GAIN (4)
SONY [ SONY CORPORATION ]
