Cable Equalizer with 2-system Switching Function
CXB1441R
Description
The CXB1441R is a cable equalizer that compensates the attenuation resulting from cable transfer of small-
amplitude differential NRZ signals.
This chip has two sets of input ports comprising three pairs of differential data signals and one pair of
differential clock signals. It equalizes and quantizes the signals from the optional ports and then outputs the
signal from the output ports. NRZ signals from 250Mb/s to 1.65Gb/s are supported.
(Applications: High-speed digital video signal switching and compensation of cable attenuation)
Features
Two sets of input ports comprising three pairs of differential data signals and one pair of differential clock signals
50Ω termination pull-up resistors built into differential data and clock inputs
Low differential data and clock input capacitance facilitates the design and manufacture of TDR standard
compatible equipment
Equalizer circuit that compensates cable attenuation improves the signal eye pattern
Output 50Ω load drive, voltage amplitude 0.5Vp-p
Single +3.3V power supply
Low power consumption
Lead-free 48-pin plastic LQFP package (7mm
×
7mm)
Package
48-pin LQFP (Plastic)
Absolute Maximum Ratings
Supply voltage
Storage temperature
V
CC
Tstg
–0.3 to +4.0
–65 to +150
V
°
C
Recommended Operating Conditions
Supply voltage
Operating temperature
V
CC
Ta
3.135 to 3.465
–20 to +75
V
°
C
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license
by any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating
the operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
-1-
E05516-PS