ICX055BL 参数 Datasheet PDF下载

ICX055BL

6. Dark signal shading

After measuring 5, measure the maximum (Vdmax [mV]) and minimum (Vdmin [mV]) values of the dark

signal output and substitute the values into the following formula.

∆Vdt

= Vdmax – Vdmin [mV]

7. Flicker

Set to standard imaging condition

II.

Adjust the luminous intensity so that the average value of the signal

output is 200mV, and then measure the difference in the signal level between fields (∆Vf [mV]). Then

substitute the value into the following formula.

F = (∆Vf/200)

×

100 [%]

8. Lag

Adjust the signal output value generated by strobe light to 200mV. After setting the strobe light so that it

strobes with the following timing, measure the residual signal (Vlag). Substitute the value into the following

formula.

Lag = (Vlag/200)

×

100 [%]

FLD

SG1

Light

Strobe light

timing

Signal output 200mV

Output

Vlag (lag)

– 11 –