ICX076AL
Diagonal 3.6mm (Type 1/5) CCD Image Sensor for EIA Black-and-White Video Cameras
Description
The ICX076AL is an interline CCD solid-state
image sensor suitable for EIA black-and-white video
cameras. High sensitivity and low dark current are
achieved through the adoption of HAD (Hole-
Accumulation Diode) sensors.
This chip features a field integration readout
system and an electronic shutter with variable
charge-storage time.
The package is a 10mm-square 14-pin DIP (Plastic).
Pin 1
14 pin DIP (Plastic)
Features
•
High sensitivity and low dark current
•
6.75MHz horizontal drive frequency employed
•
Electronic iris, backlight compensation function
•
•
•
•
(when CXD2409 is used)
Low smear
Excellent antiblooming characteristics
Horizontal register: 5V drive
Reset gate:
5V drive (no bias adjustment)
V
2
12
2
Pin 8
H
17
Optical black position
(Top View)
Device Structure
•
Image size:
•
Number of effective pixels:
•
Total number of pixels:
•
Interline CCD image sensor
•
Chip size:
•
Unit cell size:
•
Optical black:
•
Number of dummy bits:
•
Substrate material:
Diagonal 3.6mm (Type 1/5)
362 (H)
×
492 (V)
approx. 180K pixels
381 (H)
×
506 (V)
approx. 190K pixels
3.75mm (H)
×
3.30mm(V)
8.10µm (H)
×
4.45µm(V)
Horizontal (H) direction: Front 2 pixels, rear 17 pixels
Vertical (V) direction:
Front 12 pixels, rear 2 pixels
Horizontal 14
Vertical 1 (even fields only)
Silicon
Sony reserves the right to change products and specifications without prior notice. This information does not convey any license by
any implication or otherwise under any patents or other right. Application circuits shown, if any, are typical examples illustrating the
operation of the devices. Sony cannot assume responsibility for any problems arising out of the use of these circuits.
–1–
E94608C99
SONY [ SONY CORPORATION ]
